Create a masterwork for display in your shop or home with this 5-1/2" x 7" canvas by APOF. This canvas is silicone and rubber-based with a pink tone like the APOF synthetic limbs. It makes for a unique, compact wall adornment. The thickness of this is roughly 0.25"

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.

Adopt a tattooable French Bulldog who never flinches. Tattooing a real one comes with complications and too many folds. This one sits still, keeps its posture, and accepts every pass without commentary. Or snorts.

Work through the fleshy curves and folds without distractions. Compact and sturdy, this Frenchie offers just enough surface variation to stay useful while remaining dependable session after session.

Put your work where it belongs: on display. Proud, unbothered, and quietly elegant, the Frenchie looks just as natural at your workstation as he does at the front of the shop.

Practice without pressure. Whether you’re building fundamentals or testing new equipment, this canvas stays ready, cooperative, and entirely silent.

Technical Specifications:

• Net Weight: 6.86lb
• Dimensions: 10” (L) x 5” (W) x 11.5” (H)
• Manufactured from silicone and rubber-based materials
• Molded to resemble a Frenchie
• Ideal for practice or as part of a 3D portfolio
• A très chic canvas for your masterworks (and a very good boy)

Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5-10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blow dry your freshly applied stencil for 5-10 minutes. Then let it dry fully overnight.

Tattoo every flash on the page (no exceptions). This collection of tattooable flash designs is packed with bold American Traditional icons made to be tattooed. Whether you’re practicing your technique or building a showpiece, these flats offer lifelike surfaces in the shape of roses, panthers, daggers, and more. So, get to creating a fully tattooed flash portfolio (yes, that’s as meta as it sounds). It’s flash so real, it might ask for numbing cream. 

Kit Contents: 

1x Tattooable Swallow Canvas: 7.5” x 7.25” 

1x Tattooable Rose Canvas: 7” x 9” 

1x Tattooable Eagle Canvas: 5.25” x 11.5” 

1x Tattooable Panther Canvas: 11.25” x 7” 

1x Tattooable Tiger Head Canvas: 8 x 8.25”   

Technical Specifications: 

• Fitzpatrick Skin Tone 2
• Manufactured from silicone and rubber-based materials
• Ideal for tattooing practice
• Tattooable on both sides
• Made in the USA
• Price per one case of 5 flats 

Stencil Application Tips:  
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.  
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.  
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.  
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.  
Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.  
Step 5: Peel away your stencil carefully.  
Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight

Meet your new BRF (Best Rat Forever)—the APOF Naked Rat! Shake up your practice game and let this little troublemaker scurry into your portfolio. Straight from A Pound of Flesh, he’s the vermin you actually want in your shop: weird, bald, tattooable, and ready for any design you want to put on him.

Push your tattooing skills with this canvas’s contoured curves and tricky tail—it’s like tattooing a nude, wrinkly villain who wants you to succeed for some reason. Capture attention with every post—because who’s scrolling past a tattooed rat without stopping? Yeah, exactly. Tattoo him. Love him. Just don’t feed him cheese (he can’t chew, poor guy).

Technical Specifications:

• Fitzpatrick Skin Tone 2
• Net Weight: 1.7lb
• Dimensions: 9.25” (L) x 3.5” (W) x 3” (Height)
• Manufactured from silicone and rubber-based materials
• Molded to resemble a naked rat
• Ideal for practice or as part of a 3D portfolio
• Chedda’ believe he’s tattooable

Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5-10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blow dry your freshly applied stencil for 5-10 minutes. Then let it dry fully overnight.

Create a meowster-piece with these custom ink caps by Saferly. These Saferly Ink Caps are designed to look like tattooable Naked Cat by A Pound of Flesh, giving your setup a personalized boost. These ink caps are size #16 (~16mm long bases), perfect for filling with large amounts of ink for your next tattoo session. 

Technical Specifications: 

• Material: Polypropylene plastic
• Color Options: Black, Pink, Peach, ECO-friendly (biodegradable wheat straw)
• Size: #16 (~16mm long)
• Sphynx cat design
• Inspired by the tattooable Naked Cat by A Pound of Flesh
• Manufactured by Saferly
• Price per one bag of 100 

Tattoo your next masterpiece on the APOF Moth, an eye-catching canvas for practicing your skills or showcasing your work. This Moth is tattooable on both sides, so you can double the creative potential.

Technical Specifications:

• Shape: Moth
• Dimensions: 11” (W) x 5” (L)
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Stencil Application Tips:

Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.

Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.

Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.

Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.

Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.

Step 5: Peel away your stencil carefully.

Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

• Shape: Pumpkin
• Dimensions: 7.5” all around
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Tattoo your next masterpiece on the APOF Coffin, an eye-catching canvas for practicing your skills or showcasing your work. This Coffin is tattooable on both sides, so you can double the creative potential.

Technical Specifications:

• Shape: Coffin
• Dimensions: 5” (W) x 9.5” (L)
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Stencil Application Tips:

Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.

Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.

Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.

Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.

Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.

Step 5: Peel away your stencil carefully.

Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Tattoo your next masterpiece on the APOF Heart, an eye-catching canvas for practicing your skills or showcasing your work. This Heart is tattooable on both sides, so you can double the creative potential.

Technical Specifications:

• Shape: Heart
• Dimensions: 6.75” all around
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Stencil Application Tips:

Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.

Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.

Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.

Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.

Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.

Step 5: Peel away your stencil carefully.

Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Tattoo your next masterpiece on the APOF Cross, an eye-catching canvas for practicing your skills or showcasing your work. This Cross is tattooable on both sides, so you can double the creative potential.

Technical Specifications:

• Shape: Cross
• Dimensions: 6.5” (W) x 9.75” (L)
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Stencil Application Tips:

Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.

Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.

Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.

Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.

Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.

Step 5: Peel away your stencil carefully.

Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Tattoo your next masterpiece on the APOF Micro Circle, an eye-catching canvas for practicing your skills or showcasing your work. This Micro Circle is tattooable on both sides, so you can double the creative potential.

Technical Specifications:

• Shape: Micro Circle
• Dimensions: 7” diameter
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Stencil Application Tips:

Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.

Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.

Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.

Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.

Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.

Step 5: Peel away your stencil carefully.

Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Tattoo your next masterpiece on the APOF Star, an eye-catching canvas for practicing your skills or showcasing your work. This Star is tattooable on both sides, so you can double the creative potential.

Technical Specifications:

• Shape: Star
• Dimensions: 7” all around
• Part of the APOF series of tattooable flats
• Manufactured from silicone and rubber-based materials
• Ideal for practice or as part of a 3D portfolio
• Tattooable on both sides (2 canvases in 1)
• Made in the USA
• Price per one flat

Stencil Application Tips:

Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.

Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.

Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.

Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.

Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.

Step 5: Peel away your stencil carefully.

Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Presenting the Tattooable Naked Cat by A Pound of Flesh. 

Inspired by the Sphynx cat, this wrinkly, hairless cat is a proud 3D model of all your best creations. 

The hairless cat sits proudly on your shop's workstation or reception desk with plenty of room for tattoo artists to make your vision a reality.

Currently available in Fitzpatrick Skin Tone 2 (pictured)

Available Sizes:

• 13.5” (L) x 4” (W) x 5.5” (D)

Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blow-dry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

Unleash your large-scale ideas on this tattooable backpiece. The tattooable backpiece is lightweight with an even surface, so you can tattoo all your wildest full back panel ideas in miniature and with abandon. Showcase your full-back work to clients when you’re done… then book them for some real-life back panel tattoos.

Dimensions:

11” (W) x 17” (L) x .25” thick

Stencil Application Tips:

1. Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it
2. Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel
3. Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface
4. Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
5. Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
6. Peel away your stencil carefully.
7. Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Unleash your large-scale ideas on this tattooable backpiece. The tattooable backpiece is lightweight with an even surface, so you can tattoo all your wildest full back panel ideas in miniature and with abandon. Showcase your full-back work to clients when you’re done… then book them for some real-life back panel tattoos.

Dimensions:

11” (W) x 17” (L) x .25” thick

Stencil Application Tips:

1. Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it
2. Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel
3. Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface
4. Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
5. Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
6. Peel away your stencil carefully.
7. Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.