With two battery slots and handy LED indicator lights, this charger offers three charging speeds to efficiently recharge your batteries. It automatically stops charging when batteries reach full capacity and resumes charging when battery voltage drops below 4.05v. Crafted with piano springs and rigorously tested for quality, this charger includes reverse polarity and short circuit protection for added safety.

Specs:

• Battery slot monitors independently
• Made with piano springs; spring tested for quality
• Reverse polarity and short circuit protection
• Three charging modes: 2A, 1A, and 0.5A
• Comes with user manual and wall charger cable
• LED light indicator battery charger with 2 ports
• Features a fire-resistant shell
• Also protects from over-discharge and over-voltage
• Auto-recharge when voltage is less than 4.05v
• Automatically shuts off when batteries are fully charged

The only power supply on the current market that allows you to use your choice of cables or connectors - wirelessly. Introducing the Airbolt, the smallest, most portable power supply that has the capabilities to keep your machine running for over 15 hours, depending on voltage. 

You can also connect the Airbolt to the Darklab app via Bluetooth to enable eGive capabilities. 

It’s time to get off the grid and experience wireless procedures.

• Up to 15 hours of battery life*
• Weighs: 3.6 oz (102 g)
• 73mm x 48 mm x 24 mm
• Built-in anti-slip magnetic pad
• For extra support, several wearable and mounting accessories will be coming soon
• Easy to bag/barrier protect
• Voice control and eGive via Darklab app

Experience the freedom and comfort that comes with a cordless foot switch. Control the ON/OFF function of Critical Connect Universal Battery or Shorty battery packs through two modes:  Continuous & Momentary. 

Features & Benefits: 

• Multi-color LED light status & battery life indicatory 
• Non-skid rubber bottom 
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability & cordless freedom  
• Continuous & Momentary Mode Enabled 
• Critical Connect Universal Batteries are compatible & wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries)
• Can also be used with any standard clip cord 
• Size: 1” H x 5” D  
• Weight: 8.6 oz 
• 2-year manufacturer warranty 
• Made in the USA
• (2) AAA Batteries Included 
• Instruction Manual Included

The only power supply on the current market that allows you to use your choice of cables or connectors -wirelessly. Introducing the Airbolt Mini, the smallest, most portable power supply that has the capabilities to keep your machine running for up to 10 hours*.

With its intuitive controls and LED voltage display, the Airbolt is easy to use and can be paired with the Darklab app via Bluetooth for ultimate wireless control. With unlimited presets you can create within the app's Preset Bank allows artists to have endless possibilities during each session. Weighing at only 3.6 oz (102 g), the Airbolt is compact for easy travel and it’s ready to be bagged or barrier protected.

•  Weighs: 3.6 oz (102 g)
• 55.6 mm x 48 mm x 24 mm
• Up to 10 hours of battery life*
•  Built-in anti-slip magnetic pad
• Easy setup
• For extra support, several wearable and mounting accessories will be coming soon
•  eGive capabilities on the Darklab app via Bluetooth

Never set a voltage again, this is like cruise control for your brushed rotary machine. Run lower speeds than ever before while still retaining the same hitting power!

Get accurate speed readings from your brushless and coil machines. 

*Note - ESCx mode only supported on brushed rotary machines

• Proprietary machine specific motor control software drivers.
• Smart start calibration starts even the hardest machines.
• Speed (hz) or Volt (v) dual modes of operation.
• 1/4"-20 threaded mount. 
• Multi-Function clamp with ballhead arm included.
• Capacitive touch buttons that will never wear out.
• Flash memory saves all user settings.
• Screen flip option allows unit to be run in multiple orientations.
• Switchcraft® locking power connector.
• Rean® all metal 1/4" machine and pedal jacks rated to 5000+ mating cycles. 
• Dual confgurable I/O ports (machine/pedal)
• 5 machine calibration banks.
• 5 speed and 5 voltage presets for each calibration bank. 
• High contrast 2.4" OLED screen with wide viewing angle.
• Wireless Bluetooth® foot pedal coming soon! (sold separately)
• Mobile apps provide touch-less voice control options to reduce cross contamination.
• Over the air device firmware updates with bluetooth mobile app.
• iOS™ and Android™ devices supported.
• IP67 enclosure and sealed connectors prevent any contamination from ever reaching inside the unit.
• Dual voltage power adapter included for international operation (110/220v).
• 2 pack calibration cartridges included. 

Turn it on by simply holding the power button at the very top of the device.

When you turn it on, you will notice that this battery pack automatically starts at 8V. This is to jump start any machines that might need a jump start in case you are using a tighter tension membrane cartridge. 

The battery pack can operate from 4.2V up to 12V in 0.3V increments. Easily adjust the voltage on this RCA battery pack using the + or - button on the device.

When fully charged, this device allows artists to tattoo efficiently for 3–5 hours average, depending on the operating voltage being used. 

We recommend having at least 1 other battery pack on standby in the event that your battery power starts to fade during tattoo procedures

Please Note:
Always turn off the power before removing this battery pack from your tattoo machine. Failure to do so will cause the built-in failsafe to shut down the device.

To reset your battery pack, plug it into a power outlet and allow it to charge. The battery pack will become operable after approximately one hour.

The POWER UNIT IV is very versatile due to its magnetic back and bottom as well as its clip-on stand. Whether ordinary table top or suitable metal surface, the safe, comfortable hold is guaranteed. With this new tattoo power supply, it is possible for the first time to fully utilize the low-frequency operation of our SOL family. In addition, tattoo machines from other manufacturers can easily be connected via adapter cables.

The display of the POWER UNIT IV can show the stitch frequency both as a bar graph and classically via the voltage. The last set values remain stored for the continuation of the work. Foot switches can be operated in two modes for the first time. In latched mode, the foot switch for turning on and off is pressed briefly. In momentary mode the foot switch must be kept pressed during tattooing. The integrated stopwatch helps to keep track of the working time. 

THE TATTOO POWER SUPPLY FOR MORE FLEXIBILITY

• Compact tattoo power supply with focus on ergonomic, intuitive operation
• Ideal for low-frequency operation of the SOL family
• Versatile placement options thanks to powerful magnets and integrated clip-on stand
• 2 modes for foot switch operation ("latched" and "momentary")
• Voltage display (4.7 V - 12.5 V in 0.1 V steps) or bar graph display (30 steps, approx. 0.26 V per step)
• Stopwatch for measuring the time of a tattoo session
• Compatible with machines from other manufacturers via adapter (adapter is not included)
• Quality made in Germany

Powerpacks are made with leading edge battery technology weighing only 65 grams designed not to interfere with the hand more than the machine normally does.
Once the machines are rigged with Powerpacks the main unit will sense which machine is picked up and recall the settings for that machine.
High capacity batteries allows approx 5 hours of effective running time and charging takes about one hour.
Communications between the units are by radio for optimal reliability and performance.
To make the system complete, Ink Machines incorporated functions like Kickstart and Boost mode.
Kick start allows the machines to start easy and run at low voltage. Boost mode actively controls the voltage to maintain the same speed during various loads and increases the machine power significantly.
In short the RPS-600 is a complete system to control and combine your tattoo machines whether it’s a Dragonfly, Stingray or a coil machine. The RPS-600 can handle up to 6 machines with wireless Powerpacks.

Introducing the Nemesis MX2. The latest product of the Kwadron corporation.

Slimmest power supply on the market, just 18mm thick.

The glass front touch panel is very responsive.  Has a comfortable 360 degrees vice mounted on back panel. External dedicated power supply. Additional on/off switch on top of casing. Manual foot switch. 4 voltage setting programmable. And last but not least, a convenient timer so you can keep track of your time tattooing.

Voltage output range: 18VDC/2A

Voltage display and increments: 0.1V for one touch - 6.30V ; 6.40V ; 6.50V etc.

Kwadron has created a lightweight, high quality professional tattoo power supply that is packed with power. It’s compatible with both coil and rotary tattoo machines and has a hybrid latch built in, making a foot switch optional. The casing is made from a single piece of aluminum machined by CNC.

Specifications:

• Dimensions: 2.76” (L) x 3.15” (W) x 1.38”(H)
• Three digit LED display
• Adjustable voltage range 0-20V
• Voltage Input: 24VDC/ Voltage Output: 2:20VDC – max 3A
• Max power output: 24W
• Lightweight and compact with non-slip base
• Ideal for both coil and rotary tattoo machines
• External power adaptor included

Kwadron has created a lightweight, high quality professional tattoo power supply that is packed with power. It’s compatible with both coil and rotary tattoo machines and has a hybrid latch built in, making a foot switch optional. The casing is made from a single piece of aluminum machined by CNC.

Specifications:

• Dimensions: 2.76” (L) x 3.15” (W) x 1.38”(H)
• Three digit LED display
• Adjustable voltage range 0-20V
• Voltage Input: 24VDC/ Voltage Output: 2:20VDC – max 3A
• Max power output: 24W
• Lightweight and compact with non-slip base
• Ideal for both coil and rotary tattoo machines
• External power adaptor included

• *SALE* stock may have damaged boxes, but product is new
• NEW! 6 amp peak current, 4 amp true continuous current
• NEW! Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Voltage presets 2
• NEW! Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4? clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Power supply includes one magnetic universal mount
• 2 year full mfg warranty