What's the problem with the current tools on the market? They're too thick! With the help of Jonny Needles, this tool was developed.

This tool is so thin, that you can easily slide it under the dermal top without applying unnecessary pressure on the actual implant. The tool will grab the base and hold it in place so you can easily unscrew the top.

Tool is 5" long

It is only .25mm Thick and the hole in the middle of the clasp is 1.4mm wide.

5" Stainless Steel Ring Opening Pliers with Needle Nose Tips

These ring opening steel pliers by Pierced Tools are designed to easily handle and open captive rings for trouble-free captive bead removal and insertion. These needle nose pliers are 5" long, and capable of opening up segment or captive rings up to 8g ranging from 1/4" to 5/8" in diameter. The needle nose tips have two notches for secure handling.

Specifications

• Material: 410 ASTM Stainless Steel
• Pliers Length: 5"
• Able to handle captive rings up to 8g (~3mm)
• Works best with ring diameters 1/4" (~6mm) up to 5/8" (~16mm)
• Two-notched needle nose tips for secure handling

16g stainless steel threadless taper pin for internally threaded or threadless jewelry designed by Jason Coale

The taper is 16g at its thickest point.

Please note, the red tapers in the images below is a 3D CAD drawing - the tapers you will be receiving are solid surgical stainless steel and are not red

Great to prevent jewelry slipping during insertion

Total length is only 14mm long (9/16")

Autoclave safe

14g stainless steel threadless taper pin for internally threaded or threadless jewelry designed by Jason Coale  The taper is 14g at its thickest point.
Please note, the red tapers in the images below is a 3D CAD drawing - the tapers you will be receiving are solid surgical stainless steel and are not red
Great to prevent jewelry slipping during insertion
Total length is only 14mm long (9/16")
Autoclave safe

Taper is 10g at its thickest point and has a 1.2mm x 2.0mm thread on the end. Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long)  

Autoclave safe.

Taper is 12g at its thickest point and has a 1.2mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. Measures 1 inch in length(25mm long) Autoclave safe.

These implant-grade stainless steel forceps have a flat 5/8” tip that is ideal for clamping flat jewelry in hard to reach areas, like the high nostril or daith. 

The rounded point and flat tip provide easy maneuvering without the risk of puncturing or injury. 

The thickest part of the tip measures at under 2mm and the thinnest part at the edge is just under 1mm. 

This tool also features interlocking teeth that will hold the jewelry in place.

Specifications:

• Material: 410 ASTM Stainless Steel
• Forceps length: 5" (127mm)
• Tip length: 5/8" (16mm)
• Flat tip with rounded point
• Interlocking teeth near finger loops
• Price per one forceps

Looking for bending pliers that won't scratch or nick your jewelry?  These brass tipped bending pliers are perfect for the job!

Bend nose screws, change balls and posts, hold dermal tops, bend industrial barbells into intricate designs and never worry about scratching your jewelry!

The entire tool is crafted from 410 Stainless Steel with the jaw made from brass.  Do Not Autoclave!

Tool measures 60mm long and is 4mm thick and has a 1.2mm thread pattern on the end.

Use these to insert internally threaded jewelry or your dermal anchors.

4-1/2" tweezers with end designed to hold a ball or bead snugly.  Great for picking small balls and beads out of loose jewelry bins or displays.

Achieve precise straight piercings while embracing eco-friendliness using Saferly Biodegradable Mini Eco Piercing Sticks.

Crafted from biodegradable wheat straw, these environmentally conscious piercing sticks decompose in just 180 days, leaving no harmful pollutants in their wake.

Technical Specifications:

• Length: 8mm
• Aperture Dimensions: 1.7mm x 1.6mm
• Provides support for straight piercings
• Small and easy to maneuver
• Made from biodegradable wheat straw
• Biodegrades in 180 days; no harmful pollutants left behind

Please be advised, these are for an .9mm thread pattern!

1 inch in length. Great for easily tapering in 16g jewelry. 316L Surgical Steel - autoclave safe and reusable.

Taper is 10g at its thickest point and has a 2.0mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long) 

Autoclave safe.

Taper is 8g (3mm) at its thickest point and has a 2.0mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long) 

Autoclave safe.

1 inch in length. Great for easily tapering in 16g jewelry. 316L Surgical Steel - auto clave safe and reusable.

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 12g Needle to pass through with ease.

These forceps are for septums, but they also work very well for lining up nipple piercings, ear piercings, and even eyebrow piercings.

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 10g Needle to pass through with ease.

This is the true septum forcep. It has a big enough space under the tubes to allow the bridge of the nose to not get pinched when squeezing the forcep together.

Bend the perfect nostril screw every time! Over the years we have heard many piercers ask for either shorter or longer nostril screws, or screws with more acute or obtuse bends on the end.

This tool eliminates those problems. Use this tool with out U-Bend nostril pins.

You pick the wearable area, and the degree of the screw bend. Scroll down for detailed instructions on how to use this item.

Crafted from 410 ASTM Stainless Steel.

6 Piece Medium Calor Style Insertion Taper Set - 7/16" to 1"

Affordable large gauge tapers.

Each Taper Measures 2" in Length.

These are the Calor Style of Tapers. Calor Style Tapers are thicker and recessed at the large end so you can fit the jewelry inside the taper; this makes for a seamless flow from taper to insertion of jewelry and helps to prevent slipping.

You will get one of each of the following Tapers per set: 7/16" 1/2" 5/8" 3/4" 7/8" 1" 

6 Total Tapers in this set.

These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused. 

These are perfect for sizing up your eyelets. There is no chance of the jewelry slipping.  This set includes some odd sizes that you won't find anywhere to get that perfect stretch for your new jewelry.

8 piece set comes in a handy zip pouch and includes one of each of the following sizes: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm 

It is recommended you use single flare eyelets with these.

These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused. 

These are perfect for sizing up your eyelets. There is no chance of the jewelry slipping.  This set includes some odd sizes that you won't find anywhere to get that perfect stretch for your new jewelry.

16 piece set comes in a handy zip pouch and includes one of each of the following sizes: 10g, 8g, 6g, 4g, 2g, 1g, 0g, 0.5g, 00g, 7/16", 12mm, 1/2", 9/16", 15mm, 5/8", 11/16" 

It is recommended you use single flare eyelets with these.

These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused. 

These are sold in a set only, from 1-1/4" up to 2" and come in a handy carry pouch. 

Full size clamp style piercing forceps. Each tool comes individually packaged and pre-sterile for your convenience and ease of disposal.

These clamps are made from a strong acrylic material. They can be used either with the locking clamps and/or with a rubber band. (included)