Directly add details to your tattoo stencils with Saferly White Fine Tip Surgical Skin Markers. They're also useful for marking the skin during PMU procedures. Each marker uses your choice of professional white cosmetic ink or gential violent that you can easily remove with alcohol.

When you check out for a box of 100, you can easily display and hang the dispensing box in your studio with this 4mm thick display. It conveniently mounts your box to the wall.

Technical Specifications:

• Quantity: Case of 100
• Surgical skin markers for tattoo, piercing, and PMU
• Tip Line Width: 0.4mm–1.0mm
• Ink easily wipes away with alcohol + gentle scrub
• Cannot be autoclaved
• Manufactured by Saferly
• Case of 100

Directions for Use:

1. Clean skin area thoroughly with an alcohol prep or swab. Dry the area completely.
2. Carefully mark the cleaned skin area. Allow skin markings to dry.
3. Prep normally over marked site.
4. Use alcohol and a gentle scrub to remove markings.

Saferly Ultra Fine Tip Surgical Skin Marker. This pens tip won't clog and stays needle sharp - yet soft enough to insure patient safety!

The ink is gentian violet. It is a surgical ink that is the only ink approved for use on human skin during any invasive procedures.

It can be removed with alcohol and a gentle scrub. It becomes a more permanent mark once it is allowed to dry. The pen is non-sterile and aseptic.

Do not autoclave. It will melt!

It is, as all pens like this are, intended for single patient use. The barrel doesn't need to be sterilized because it shouldn't be coming into contact with the wound site. The tip has never touched skin, so as long as it is single patient use, there is no chance for cross-contamination. The pen should be discarded or given to the client after use.

Price is for one - Quantity discounts are available.

Directions for Use:

1. Clean skin area thoroughly with an alcohol prep or swab. Dry the area completely.
2. Carefully mark the cleaned skin area. Allow skin markings to dry.
3. Prep normally over marked site.
4. Use alcohol and a gentle scrub to remove markings.

Spirit brand blue carrier sheet. Protects stencil paper and lengthens life of your thermofax

Thermofax machines tend to develop 'hot spots' as they are used over and over. Using this Spirit brand blue thermofax carrier spreads the thermal energy evenly over the entire transfer paper, helping to get rid of the “burns” that occur. It also helps to reduce over and underexposure which allows you to get and even, clear stencil.

Size is approximately 8-5/8" x 14.5"

Please Note: Blue Carriers are designed for use with older 3M thermal machines. If you have the Panenka Thermal Imager or other A3/A4 thermal machines, it is recommended to use a Clear Carrier.

Ingredients:
Water (aqua), Lauryl Glucoside, Propylene Gylcol, Cocamidolpropyl Betaine, PPG-2 Hydroxyethyl Cocamide, Xanthan Gum, Citric Acid, Tetrasodium EDTA

A revolutionary product that keeps marker and pen drawings on longer while you work on your free hand tattoos! Spray Stuff "Draw it on...Keep it on!"

Spray Stuff allows you to work more confidently from the start. After drawing on the skin with either markers or pens, spray a light mist over the area and allow it to dry, and you'll be ready to go...

No harsh chemicals.
100% non-toxic & vegan friendly.

Sterilized and Interchangeable Mini Surgical Skin Marker by Saferly

Safely mark your clients skin for piercings or other body art with this Mini Surgical Skin Marker by Saferly.

If you are working on a larger project (i.e. a corset piece or outlining a tattoo free hand) and you need the comfort of a full size pen, you can unscrew one of these mini markers and use with our steel barrel tube. Once the large project is done, unscrew the tip and toss it, and sterilize the steel tube. You cut down on waste and save yourself time and money.

This listing is for a single or a box of 30 Saferly Mini Surgical Skin Markers.

Specifications:

• Quantity Options: Single or Box of 30
• Ink in pen: Gentian violet (a surgical ink that is the only ink approved for use on human skin during any invasive procedure)
• 0.7mm“0.9mm tip
• Removal: Remove with alcohol and a gentle scrub (Note: It becomes a more permanent mark once it is allowed to dry)
• Sterile and aseptic
• Sterilized by Gamma Ray
• Cannot be autoclaved
• Single patient use pen
• Discard pen after use
• Price per one pen or a box of 30

Instructions:

1. Clean skin area thoroughly with an alcohol prep or swab. Be certain to dry the area completely.
2. Carefully mark the cleaned skin area. Allow skin markings to dry.
3. Prep normally over marked site. Markings will remain permanent.

Professional Tattoo Stencil Marker by Saferly

Saferly Professional Tattoo Stencil Markers are designed to permit crisp, clean freehand stencil designs. Draw directly onto your client’s skin with these Saferly markers, which come equipped with dual tips, thick and thin, for versatility. The Saferly Tattoo Stencil Marker is remarkable for its lasting ink; 80% of the ink will stay on a client’s skin, even after the site is washed with green soap.

This listing is for a single option of Saferly Tattoo Stencil Markers.

Specifications:

• Quantity Option: Single
• Professional tattoo stencil markers
• Ink is smudge-free and sticks well
• Versatile dual tips: thick and thin
• Manufactured by Saferly
• Price per one

Directions for Use:

1. Make sure the skin is properly cleaned and dried before using the Saferly Stencil Marker
2. If you used other markers with lighter ink for the initial sketch, you can use the Saferly marker for the final lines. Make sure that the previous marker has dried before using the Saferly marker over top of it.

Meet TIM, the next generation of thermal printers by 3K Instruments. This reliable printer reduces your energy consumption by 25% while outperforming most popular printers on the market.

Print your stencils on any copy paper without any issues. TIM features a higher, faster exposure speed than other thermal printers on the market, making it adaptable to all types of stencil paper.

Print more stencils and faster thanks to TIM’s sensor-controlled cooling system. This printer cools down 6 minutes after printing, so you can return to printing faster than other printers on the market with slower cooldown times.

Enjoy effortless maintenance with the easy-clean roller and reflector. This glass roller is silicone-coated, which makes it easy to clean with alcohol wipes. Find a spare glass roller available separately here.

Technical Specifications:

• Weight: 13lbs (~6 kg)
• Dimensions: 16.5" (W) x 4.3" (H);"> 7" depth
• Prints crisp, clear stencils in a few seconds
• Compatible with all styles of stencil paper
• Uses infrared-technology
• Improved power consumption: approx. 1000 Watt
• Reduces energy consumption in your shop by ~25%
• Sensor-controlled cooling;"> cools down within 6 minutes
• Easier to clean silicone-coated glass roller
• Spare glass roller available
• Spare lamp available
• Also available in black
• Software control for all functions and components for increased safety,
• Voltage: 115 &"> 230 V AC, CE
• 20 mm x 5 mm, 16 Amp slow-blow fuse

Included with Your Purchase:
TIM comes with a Quick Start Guide (German/English), North American power plug, a 12.5" carrier and one test sheet.

A good tattoo begins with a good stencil. After years of development and testing, Nikko Hurtado would like to present Anchored. Using his years of knowledge and a few years of trial and error, we are confident that we have come up with a stencil solution you are going to love.

Anchored Stencil solution will produce clear, crisp lines so your stencil is a more accurate representation of your original drawing. Just as importantly, the stencil will stick for hours as you perform your work, relieving you of having to worry about how the last line of that stencil is going to hold up.

Ingredients:
Aloe Barbadensis (Organic Aloe) Leaf Juice, Propylene Glycol, Sodium Stearate, Phenoxyethanol, Plyquaternium 7, Tetrasodium EDTA, Polysorbate, Carbomer

Directly add details to your tattoo stencils with Saferly White Fine Tip Surgical Skin Markers. They're also useful for marking the skin during PMU procedures. Each marker uses your choice of professional white cosmetic ink or gential violent that you can easily remove with alcohol.

Technical Specifications:

• Quantity: Single
• Surgical skin markers for tattoo, piercing, and PMU
• Tip Line Width: 0.4mm–1.0mm
• Ink easily wipes away with alcohol + gentle scrub
• Cannot be autoclaved
• Manufactured by Saferly
• Price per one single marker

Directions for Use:

1. Clean skin area thoroughly with an alcohol prep or swab. Dry the area completely.
2. Carefully mark the cleaned skin area. Allow skin markings to dry.
3. Prep normally over marked site.
4. Use alcohol and a gentle scrub to remove markings.

Ensure precise positioning of stencils effortlessly with Saferly Clear Tattoo Stencil Sheets. Utilize these transparent sheets alongside your preferred thermal paper to craft transparent stencils that are easy to position.

Ideal for intricate tattoo placements like sleeve fillers or fine details on current tattoos, these see-through stencils offer accuracy. Moreover, they're invaluable for cover-up work, providing a clear view of how the stencil aligns with the existing tattoo. This eliminates guesswork in creating an effective cover-up tattoo.

These transparent stencil sheets are designed to work seamlessly with a wide range of standard stencil papers and printers.

Electrum Tattoo Stencil Primer / stencil applicator solution was developed by tattoo artists, for tattoo artists.

Electrum can be used with sharpies, tattoo pens, and carbon paper. It is an all inclusive product, you don't need a separate spray or product. Apply it, let it dry like normal, then apply your drawing or stencil on top of it, the image will hold true!

Electrum is:

• Deodorant Free
• Non Toxic
• Skin Friendly
• Vegan Approved

The solution for longer lasting tattoo stencils!

8 FL OZ bottle (250mL)

These are made specifically to hold the Tattoo Skin Doodler Pens.  Just drop the pen into the holder well and tighten down into place.  These work great for long project drawing sessions to help prevent hand cramping.

Pen holder is 4" long and 5/8" thick.  Pens are sold separately.

Sterilized and Interchangeable Mini Surgical Skin Marker by Saferly

Safely mark your clients skin for piercings or other body art with this Mini Surgical Skin Marker by Saferly.

If you are working on a larger project (i.e. a corset piece or outlining a tattoo free hand) and you need the comfort of a full size pen, you can unscrew one of these mini markers and use with our steel barrel tube. Once the large project is done, unscrew the tip and toss it, and sterilize the steel tube. You cut down on waste and save yourself time and money.

This listing is for a single or a box of 30 Saferly Mini Surgical Skin Markers.

Specifications:

• Quantity Options: Single or Box of 30
• Ink in pen: Gentian violet (a surgical ink that is the only ink approved for use on human skin during any invasive procedure)
• 0.7mm“0.9mm tip
• Removal: Remove with alcohol and a gentle scrub (Note: It becomes a more permanent mark once it is allowed to dry)
• Sterile and aseptic
• Sterilized by Gamma Ray
• Cannot be autoclaved
• Single patient use pen
• Discard pen after use
• Price per one pen or a box of 30

Instructions:

1. Clean skin area thoroughly with an alcohol prep or swab. Be certain to dry the area completely.
2. Carefully mark the cleaned skin area. Allow skin markings to dry.
3. Prep normally over marked site. Markings will remain permanent.

Meet TIM, the next generation of thermal printers by 3K Instruments. This reliable printer reduces your energy consumption by 25% while outperforming most popular printers on the market.

Print your stencils on any copy paper without any issues. TIM features a higher, faster exposure speed than other thermal printers on the market, making it adaptable to all types of stencil paper.

Print more stencils and faster thanks to TIM’s sensor-controlled cooling system. This printer cools down 6 minutes after printing, so you can return to printing faster than other printers on the market with slower cooldown times.

Enjoy effortless maintenance with the easy-clean roller and reflector. This glass roller is silicone-coated, which makes it easy to clean with alcohol wipes. Find a spare glass roller available separately here.

Technical Specifications:

• Weight: 13lbs (~6 kg)
• Dimensions: 16.5" (W) x 4.3" (H);"> 7" depth
• Prints crisp, clear stencils in a few seconds
• Compatible with all styles of stencil paper
• Uses infrared-technology
• Improved power consumption: approx. 1000 Watt
• Reduces energy consumption in your shop by ~25%
• Sensor-controlled cooling;"> cools down within 6 minutes
• Easier to clean silicone-coated glass roller
• Spare glass roller available
• Spare lamp available
• Also available in green
• Software control for all functions and components for increased safety,
• Voltage: 115 &"> 230 V AC, CE
• 20 mm x 5 mm, 16 Amp slow-blow fuse

Included with Your Purchase:
TIM comes with a Quick Start Guide (German/English), North American power plug, a 12.5" carrier and one test sheet.

Professional Tattoo Stencil Marker by Saferly

Saferly Professional Tattoo Stencil Markers are designed to permit crisp, clean freehand stencil designs. Draw directly onto your client’s skin with these Saferly markers, which come equipped with dual tips, thick and thin, for versatility. The Saferly Tattoo Stencil Marker is remarkable for its lasting ink; 80% of the ink will stay on a client’s skin, even after the site is washed with green soap.

This listing is for Box of 25 of Saferly Tattoo Stencil Markers.

Specifications:

• Quantity Option: Box of 25
• Professional tattoo stencil markers
• Ink is smudge-free and sticks well
• Versatile dual tips: thick and thin
• Manufactured by Saferly
• Box of 25

Directions for Use:

1. Make sure the skin is properly cleaned and dried before using the Saferly Stencil Marker
2. If you used other markers with lighter ink for the initial sketch, you can use the Saferly marker for the final lines. Make sure that the previous marker has dried before using the Saferly marker over top of it.

Prep Stuff™ is a revolutionary new product for prepping the skin prior to tattooing! It kills 99.9% of germs and microbes including staph without removing vital skin oils!

Also using Prep Stuff before applying your tattoo stencil will hold your stencil on even better when using Stencil Stuff®. Also used as a stencil remover! If you’re not happy with the placement of your Tattoo Stencil, use Prep Stuff™ to clean it off to reapply the stencil.

(Shake well before Use)

“The Germ Killer!”

Spirit Green Thermal Paper - 8.5" x 11" - 100 Sheets

• 1st ever green colored thermal
• Great visibility on dark skin tones
• Compatible with all thermal printers

Spirit® Thermal Tattoo Transfer Papers are made for the professional artist. From our high visibility green dyes to our ripstop stencil sheets, we use only the highest quality materials.

Every time we manufacture, we test to ensure that the finished product meets our standard for excellence; if it doesn't, we don't sell it.

And we manufacture everything here in the United States, just like we have since 1948.

Currently only available in a 8 FL OZ bottle (250mL)

You are purchasing one bottle

Electrum Premium Tattoo Stencil Remover and Skin Prep is perfectly formulated for you and your client.
Easily remove improperly placed stencils without the use of excessively harsh chemicals.
Use as a skin prep to remove surface oils and dirt prior to placing your stencil.
Contains Australian Tea Tree Oil, a powerful antiseptic which kills many bacteria, viruses, and fungi on contact without drying out the skin.
And of course it smells good too!