Perfect for use with forceps, stabilizing tattoo needles, or securing tattoo barriers.

These #12 black rubber bands are made from synthetic polyisoprene and are completely latex free; meaning no latex or latex compounds have been added to them at all.

They measure 1.75” flat, .063” wide and a .040” wall.

Each bag contains approximately 725 rubber bands.

Bag of 100 black rubber nipples for needle bars.

High impact, long lasting.

Bag of 100 black rubber grommets for needle bars.

High impact, long lasting.

Razorblade PRO brand replacement brass front binding post with 8/32" thread pattern.  Made specifically for use with American coil tattoo machines.  8/32" is the most common thread pattern used amongst tattoo machine builders.

Razorblade PRO brand replacement brass rear binding post with 8/32" thread pattern.  Made specifically for use with American coil tattoo machines.  8/32" is the most common thread pattern used amongst tattoo machine builders.

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

These individual front springs, made by Precision, are designed to work with any conventional armature bar.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes.

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

These individual front springs, made by Precision, are designed to work with any conventional armature bar.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes.

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

These individual front springs, made by Precision, are designed to work with any conventional armature bar.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes.

Crafted from copper wire, this 12-wrap coil for tattoo machines features a 47V-35uF capacitor. Check specifications for dimensions. Requires M4 Metric Screws for mounting.

Specifications:

• Total Height of Coil: 32mm
• Height of Wrap Portion: 28.5mm
• Width of Each Coil: 21mm
• Total Width: 43mm
• Iron Caps Width: 9.5mm
• Capacitor Size: 47V-35uF
• Material: Copper Wire
• Diameter of Internal Threading: 4mm
• Thread Length: 0.7mm
• Screws Required: M4 Metric Screws (Not Included with 12 Wrap Coil)

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

Try out these 8 wrap tattoo machine coils made with copper wire.  The capacitor used for this coil is 47V-35uF.  

The dimensions of the coils are listed under the specifications below. In order to mount this coil to your tattoo machine, M4 Metric Screws are required (M4 refers to the diameter of the threading (4mm) and the distance of each thread is 0.7mm)

Specifications:

• Total Height of Coil: 32mm
• Height of Wrap Portion: 28.5mm
• Width of Each Coil: 18mm
• Total Width: 36.5mm
• Iron Caps Width: 9.5mm
• Capacitor Size: 47V-35uF
• Material: Copper Wire
• Diameter of Internal Threading: 4mm
• Thread Length: 0.7mm
• Screws Required: M4 Metric Screws (Not Included with 8 Wrap Coil)

Binding post screw with knurled head.

Each screw is 12mm in length. Top screw head is 2.8mm thick with an 8mm diameter.

Thread post length is 7.5mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

Binding post screw with knurled head.

Each screw is 13mm in length. Top screw head is 5mm thick with an 8mm diameter.

Thread post length is 8mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

Binding post screw with knurled head.

Each screw is 12mm in length. Top screw head is 3.0mm thick with an 8mm diameter.

Thread post length is 7.5mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

Binding post screw with knurled head.

Each screw is 12mm in length. Top screw head is 4mm thick with an 8mm diameter.

Thread post length is 7.5mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

This rear binding post is made of copper. 

Each post is 10mm long and 8.0mm in diameter.  

The diameter of the threaded hole for the contact screw is 4.0mm.

Thread length (distance between each thread) is 0.7mm which makes it M4 Metric.

Price is for one piece so take advantage of our quantity discounts so that you have extras on hand!

This rear binding post is made of copper. 

Each post is 10mm long and 9.0mm in diameter.  

The diameter of the threaded hole for the contact screw is 4.0mm.

Thread length (distance between each thread) is 0.7mm which makes it M4 Metric.

Price is for one piece so take advantage of our quantity discounts so that you have extras on hand!

100 Per Bag. Used to attach the Needle Bar Loops to your Armature Bar A different approach to traditional rubber nipples. These allow for a better tighter fit.

.016" Thick Tapered Blue Carbon Steel Back Spring

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

Your standard coil machine needs tuning from time to time. The spring flake adjuster tool is perfect for aligning the armature bar with the front and back springs, to keep the machine running smoothly.

The entire tool is made from 316L stainless steel. The big block portion measures 78mm long and 20mm wide, while the inside portion is 10mm wide and 9mm tall.

Please be advised you are only purchasing the tool. No armature bars or springs are included in your purchase.

Plastic thumb screw used on the binding post to keep pressure on the contact screw.

Brass contact screw replacement part for your tattoo machine.

After testing out various sizes, Symbeos Rubber bands were selected in order to allow you to achieve the perfect amount of tension on your needle bar while running your Symbeos rotary machine system or for any other reason.

Razorblade PRO brand replacement brass front binding post with 8/32" thread pattern.  Made specifically for use with American coil tattoo machines.  8/32" is the most common thread pattern used amongst tattoo machine builders.