316L surgical steel  and brass 16 gauge segment ring with baguette cubic zirconia flower. Gold and Rose Gold are PVD coated for strong and long lasting color. 

16g 3/8" Steel Segment Captive Rings with Tribal Fangs. Black is PVD coated for it's hypoallergenic properties and long lasting color

16 gauge captive ring with bead that threads on or off.

Bead size is 4mm.

These are a great alternative to traditional captives and horseshoes.

316L Surgical Steel barbell with steel balls. Reduced end taper threading. High polish, mirror finish. For industrial lengths in 16g, see our industrial category.

316L surgical steel horseshoe with 3mm steel balls. High polish, mirror finish. External 1.2mm thread pattern.

316L surgical steel curve barbell with external thread 3mm steel balls. High polish, mirror finish bent barbell

These look great in multiple piercings. Also called corkscrews, the helix barbell is not to be confused to the helix piercing.

Above is a highly adorned ear with a 3 twist helix barbell used through multiple cartilage piercings. We carry the Helix in 2, 3, 4, or 5 twist.

Twist Specs:

• 2 Twist
  • Overall width from ball to ball: 25mm
  • Inner diameter: 12mm
  • Space between twists: 9mm
• 3 Twist
  • Overall width from ball to ball: 36mm
  • Inner diameter: 12mm
  • Space between twists: 9mm
• 4 Twist
  • Overall width from ball to ball: 36mm
  • Inner diameter: 9mm
  • Space between twists: 6mm
• 5 Twist
  • Overall width from ball to ball: 32mm
  • Inner diameter: 9mm
  • Space between twists: 5mm

16g Surgical Steel Push-In Style Labret with 3 Marquise Prong Set Gems.

These pieces are perfect for most labret/monroe and cartilage piercings.

Each 16g labret has a beautiful and easy to use push-in style triple prong set gemmed top 

16g Titanium Threadless Labret Post only!

This 16g threadless labret post can be worn with your favorite threadless-style tops.

0.5mm; Compatible with 0.45mm Threadless Shafts

Featuring a 2.5mm flat disc, the labret post is made from high-quality titanium.

The threadless style allows you to switch up your look with ease and comfort.

16 gauge solid titanium. Available in a number of different lengths and colors. Choose your length and color below

How to Use Threadless Jewelry:

Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place.

Follow the instructions below to secure the threadless end into the threadless shaft

1. Insert the pin one-third to halfway into the shaft.
2. Hand-bend slightly the insertion pin against the shaft.
3. Push the end into the shaft and test the fit.
4. Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.

16g Titanium Threadless Labret Post only!

This 16g threadless labret post can be worn with your favorite threadless-style tops.

0.5mm; Compatible with 0.45mm Threadless Shafts

Featuring a 4mm flat disc, the labret post is made from high-quality titanium.

The threadless style allows you to switch up your look with ease and comfort.

16 gauge solid titanium. Available in a number of different lengths and colors. Choose your length and color below

How to Use Threadless Jewelry:

Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place.

Follow the instructions below to secure the threadless end into the threadless shaft

1. Insert the pin one-third to halfway into the shaft.
2. Hand-bend slightly the insertion pin against the shaft.
3. Push the end into the shaft and test the fit.
4. Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.

16 gauge circular (horseshoe) barbells with 3mm titanium balls. Medical grade titanium circular barbells with titanium balls. Externally threaded.

16g curved titanium barbell with titanium balls.

Solid, medical grade titanium, not the plated stuff you find everywhere else. High quality.

Choose from two different bar lengths and thirteen different colors!

These gorgeous and ultra-convenient segment clicker rings are a reliable accessory for your septum piercing.  Solid titanium is perfect for body piercings as it is lighter than steel and is hypoallergenic.

This clicker style ring is 16g and available in three diameter options: 1/4", 5/16", and 3/8" (6mm, 8mm, and 10mm). Each piece is made of high quality titanium and is available in a number of colors.

This is medical grade titanium, not the steel plated stuff you find elsewhere. Lightweight, nickel free, and vibrant in color.

3mm ball standard on all lengths.

External Threading: 1.2mm

Easy insertion and removal.

A great alternative to traditional captives for the nostril. Also works well in rooks and tragus.

18g - 16g Loose Steel External Thread Cone Ends.

Fits any piece of our jewelry from 16g to 18g.

External 1.2mm thread pattern.

Solid titanium half-ball which is currently available in 2, 2.5, 3 or 4mm. These can be used with any of our 18g to 16g jewelry with internal 0.9mm thread pattern.

Post length is approximately 1.5mm.  The ball is manufactured from exceptional quality, solid titanium, which makes it almost completely hypo-allergenic and lending itself to safe extended wear. Also comes in a number of jeweled colors AND anodized colors.

These balls will fit in either 18g or 16g because of it's 0.90mm internally threaded pattern.

The ball is manufactured from exceptional quality, solid titanium, which makes it almost completely hypo-allergenic and lending itself to safe extended wear.

Solid titanium ball which is currently available in 2mm or 4mm.  These can be used with any of our 18g to 16g jewelry with internal 0.9mm thread pattern.

Titanium 6Al-4V-Eli ASTM: F-136
Fits 18g and 16g internally threaded jewelry or any internally threaded jewelry with a matching internal thread pattern.

Thread length is 2mm

Thread pattern is 0.9mm

Made from 1 solid piece of material. You are only buying 1 End. You will need to buy the jewelry separately.

18 gauge BioPlastic BALL Nose Screw Body Jewelry. 7mm wearable area

You pick one of the 4 colors, price is per piece.

Flexible design is easy to insert/remove from piercing, and comfortable to wear.

Ball head measures 2.5mm wide