250 Ink Cups with Base Size # 25 for Tattoo Ink

Plastic Ink Cups Size #25. Perfect clear ink cups with stable flat bottom base,

You are buying one bag. Each Bag contains 250 #25 Ink Cups.

There is a wide base which eliminates the need for ink cup holders.

1oz of ink is approximately 1000 drops

#25 ink cups hold approx 300 drops

High quality RCA Cord to power your tattoo machine.

5ft Long Cord. 1/4" Jack

Works well with a wide range of power supplies and tattoo machines.

Available in 150ml/5oz

Panthera's new molecular technology gives these Grey Wash inks a deep velvet gloss with extra durability from sun fade.

Perfect Gray Wash Tattoo ink Direct from Italy

Available in 150ml/5oz

Panthera's new molecular technology gives this grey wash ink a deep velvet gloss with extra durability from sun fade. Imported Directly from Italy.

This ink is amazing!

These M4 Metric brass contact screws have a total length of 27mm.

The threaded post is 20mm long and the screw head measures 7mm thick and has a diameter of 8mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

This rear binding post is made of brass. 

Each post is 10mm long and 8.0mm in diameter.  

The diameter of the threaded hole for the contact screw is 4.0mm.

Thread length (distance between each thread) is 0.7mm which makes it M4 Metric.

Price is for one piece so take advantage of our quantity discounts so that you have extras on hand!

Binding post screw with knurled head.

Each screw is 14mm in length. Top screw head is 6mm thick with an 8mm diameter.

Thread post length is 8.0mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

Binding post screw with knurled head.

Each screw is 13mm in length. Top screw head is 5mm thick with an 8mm diameter.

Thread post length is 8mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

This connector cord is for use with your Cheyenne Hawk power cord in order to allow your machine to work with power supplies that have banana jacks.

The 4mm red and black tips are on an 8” cord.

This spare Phono Tip Cord connects to the Cheyenne Power Cord so that your Hawk tattoo machine will work with power supplies with a phono jack.

Cable has a 1/4” jack mono plug and is 7” in length.

The Cheyenne Hawk Spare Power Cord is a Cheyenne certified replacement cord for use with your Hawk tattoo machine.

Cord is 6.5 ft. long and connects your Hawk tattoo machine to the Cheyenne power supplies (PU-1 and PU-2).

You are purchasing a replacement power cord only.

This German-engineered Cheyenne Hawk Spirit Tattoo Machine is a top of the line tool of the tattoo trade, providing expert precision, speed, comfort, and versatility with zero compromise.

The Hawk Spirit is highly durable and incredibly powerful with an ultra sensitive reaction time and stronger puncture force and frequency. All of these things allow tattoo artists to simply focus on their art on the skin.

The Hawk Spirit is excellent for any style, technique, skin areas, and skin types.

With over 40 different needle cartridges that it can accommodate and with its simple replacement/cartridge system, hygienic, artistic, and fast tattooing has never been this easy.

You are purchasing a Cheyenne Hawk Spirit motor only.

Our stock availability on this item fluctuates rapidly.  If you purchase this item, please allow up to three business days for us to fill your order.  Please call if you would like to check availability.  Thanks for your understanding!

Visions of pulp era superheros fill his thoughts. Choosing a career in advanced physics, he dreams big. But harsh reality cuts in as he grows, and he ends up accepting a job building surveillance drones for the military. Little does he know, this is only a probative period, and he is soon moved into the clandestine world of investigating crashed alien craft. A dream come true, he's fascinated beyond his wildest imagining. His lack of social skills eventually gets him fired, but he's seen too much.

A year later he returns, and pulls off a bloody heist. The military in hot pursuit, he makes a mad scramble up the coast. Only the world has grown strange. Businesses are closed. Highways deserted. As the world falls apart about him, he soon finds that trigger happy locals and brutal militias aren't the worst of his problems. Death, madness, and the return of creatures from another world all await. At 18, Dan was kicked out of the house. He spent the next 8 months homeless, often sleeping in the woods. Finally getting a steady job and a place to live, a friend flipped his old car and he went through the windshield.

After a two week recovery, he moved, out of necessity, from Northern Virginia to downtown Washington DC.

A year and a half later, a crack head broke into his house, and the resulting knife fight severed the tendon on his left hand. After surgery and yet another move, he finally attended art school. His work made it into galleries, political cartoons for Madcap Magazine, covers for Maximum Rock and Roll, and numerous t-shirts and ads. Leaving art school early, at the advice of a teacher, he headed to NYC to pursue a career in art. Two interviews with DC Comics made him realize they paid very little, and only wanted superheroes.

At the urging of a tattoo artist, he went into the field. He's now been tattooing 11 years, and has been featured in a slew of books, magazines, newspapers, and on TV in the US and Europe, both for his tattoo work, and for his more traditional artwork.

Tattooing has been very generous. Life, not so much. He had brain cancer in 2001, and was in Bellevue Hospital, recuperating in ICU, when the twin towers went down.

Seven years later, his wife died in a hit and run. But his motto is that life is what you make of it. He's always written, producing full novels (that he's sure were horrible) by the 5th grade, and taking numerous creative writing classes. He's put out quite a few articles over the years, and THE BLACK SEAS OF INFINITY is his first novel, published by Anarchy Books in 2011. Already hard at work on a collection of short stories, he hopes to have a new book out sometime next year.

190+ Individual Parts.

Maintain or rebuild your machine with everything you need all found in a double sided tackle style box.

Parts you will receive:

• Hex Flat Head Screws
• Hex Semisphere Head Screws
• Hex Column Head Screws
• Nylon Screws
• Hex Socket Set Screws with Cup Point
• Front Binding Posts
• Rear Binding Posts
• Steel Washers
• Nylon Washers
• Solder Lugs
• Nonleaded Solder
• Heatshrink Tubing
• Capacitors
• Coils
• Grommets and Nipples
• Jumper Wire

Also, check the list on the image below for further reference.

100 assorted flexible acrylic styles and colors. Made from comfortable and flexible PTFE.

14g 5/8" with 5mm balls on each end.

One 4oz tube of A & D Ointment.

For bulk pricing click here

Vitamins A & D act as a skin protectant. Use A & D during tattooing or as immediate aftercare.

14g 3/8" surgical labret stud with UV acrylic ball.

Package will contain 50 assorted colors & styles.

Styles include UV, glow, candy strip, two tone, three tone, glitter, marble, swirl, checker, spider, flower dot, round dot & more!

PTFE threading tool that works on both 16g & 14g PTFE.

You will receive 1 threading tool. On one side you can thread 16g - 1.2mm and on the other side you can thread 14g - 1.6mm

A two-in-one tool with a nice textured grip for easy threading.

Made from 410 ASTM Steel and is 3" (75mm) long and 8mm (5/16") thick.

A neo-traditional sketch book with 50 total pages.

40 black and white images and 10 full color prints.

Printed on a sturdy card stock spiral bound with front and back protective covers.

Polytetrafluoroethylene aka PTFE - Teflon is an inert wear-resistant, slippery and flexible plastic, and has been used extensively as a component of permanent and temporary surgical implants.

Used in surface piercings, pregnancy bars, and more, PTFE is extremely versatile. The ends are self threading, so ANY of our 16g ends will thread onto it.

By purchasing (1) you will receive (1) 5 meter roll

This stool has a 16" wide seat (40cm) and sits at a height of 17" (44cm) and is adjustable up to 20" (53cm).

The feet sit approximately 29" (75cm) and the cushioned seat sit at about 3.5" (9cm) high.

Seat is leather with a sponge insert. Legs and feet are plastic.

Great shop stool. Also would work great for mechanics, car detailers, salons, and permanent makeup techs. 

Comes unassembled in 3 parts and is very easy to put together.

Containers for used medical needles and other sharp medical instruments. Designed so needles can be dropped in the container without touching the outside. Commonly used in EMS, hospitals, nursing homes, clinics and doctors offices, etc. Transparent lid allows for visual monitoring of contents to avoid overfilling

6" Flat Nose Hemostat tool by Shawn O'Hare for Dermal Anchor Insertion.

410 ASTM Stainless Steel. The best tools on the market right now. With the flat nose of this hemostat, you can clamp any size dermal anchor head. Because the head of this hemostat is flat, inserting the dermal anchor remains flush against the body.

14g 7/16" Prong Set Pink Jewel with Jeweled Pink Breast Cancer Ribbon Dangle Jewelry.

Fully Adjustable Tattoo Armrest.  Can also be used as a leg rest. High quality.

7" ring opening pliers with 3 notches and needle nose for tight spaces.

Opens ring to help in removing and inserting beads from captive rings.

Works best on rings from 5/16" to 1" in diameter and up to 4 gauge in thickness