These implant-grade stainless steel forceps have a flat 5/8” tip that is ideal for clamping flat jewelry in hard to reach areas, like the high nostril or daith. 

The rounded point and flat tip provide easy maneuvering without the risk of puncturing or injury. 

The thickest part of the tip measures at under 2mm and the thinnest part at the edge is just under 1mm. 

This tool also features interlocking teeth that will hold the jewelry in place.

6 Piece Medium Calor Style Insertion Taper Set - 7/16" to 1"

Affordable large gauge tapers.

Each Taper Measures 2" in Length.

These are the Calor Style of Tapers. Calor Style Tapers are thicker and recessed at the large end so you can fit the jewelry inside the taper; this makes for a seamless flow from taper to insertion of jewelry and helps to prevent slipping.

You will get one of each of the following Tapers per set: 7/16" 1/2" 5/8" 3/4" 7/8" 1" 

6 Total Tapers in this set.

These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused. 

These are perfect for sizing up your eyelets. There is no chance of the jewelry slipping.  This set includes some odd sizes that you won't find anywhere to get that perfect stretch for your new jewelry.

8 piece set comes in a handy zip pouch and includes one of each of the following sizes: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm 

It is recommended you use single flare eyelets with these.

These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused. 

These are perfect for sizing up your eyelets. There is no chance of the jewelry slipping.  This set includes some odd sizes that you won't find anywhere to get that perfect stretch for your new jewelry.

16 piece set comes in a handy zip pouch and includes one of each of the following sizes: 10g, 8g, 6g, 4g, 2g, 1g, 0g, 0.5g, 00g, 7/16", 12mm, 1/2", 9/16", 15mm, 5/8", 11/16" 

It is recommended you use single flare eyelets with these.

These tapers are made 316L ASTM F-138 Implant Grade Stainless Steel. They can be autoclaved and reused. 

These are sold in a set only, from 1-1/4" up to 2" and come in a handy carry pouch. 

Looking for bending pliers that won't scratch or nick your jewelry?  These brass tipped bending pliers are perfect for the job!

Bend nose screws, change balls and posts, hold dermal tops, bend industrial barbells into intricate designs and never worry about scratching your jewelry!

The entire tool is crafted from 410 Stainless Steel with the jaw made from brass.  Do Not Autoclave!

5" length. Made from high grade 410 ASTM surgical steel.

Excellent for inserting dermals.

Visually appealing black oxide coated steel pennington forceps. Not only do they look good, they also help prevent eye fatigue by reducing light glare when in use. But best of all, the black oxide also acts as a protection against corrosion, giving your tools a longer life.
These small sized pennington forceps are excellent for clamping hard-to-reach or tighter areas during a piercing procedure.
This tool measures at a total of 6.5” long with the inner tip measuring 8mm long and 4.7mm at its widest point.
The slotted opening is 2.2mm, which will clear needles up to 14g.

Specs

• Material: 410 ASTM Stainless Steel with Black Oxide Coating
• Forceps Length: 6.5”
• Inner Tip Length: 8mm
• Inner Tip Width: 4.7mm
• Slot Opening: 2.2mm
• Serrated jaws for secure grip
• Interlocking teeth near finger loops

Visually appealing black oxide coated steel pennington forceps. Not only do they look good, they also help prevent eye fatigue by reducing light glare when in use. But best of all, the black oxide also acts as a protection against corrosion, giving your tools a longer life.
These small sized pennington forceps are excellent for clamping hard-to-reach or tighter areas during a piercing procedure.
This tool measures at a total of 6” long with the inner tip measuring 11mm long and 5mm wide at the top.
The slotted opening is 2mm, which will clear needles up to 14g.

Specs

• Material: 410 ASTM Stainless Steel with Black Oxide Coating
• Forceps Length: 6”
• Inner Tip Length: 11mm
• Inner Tip Width (at top): 5mm
• Slot Opening: 2mm
• Serrated jaws for secure grip
• Interlocking teeth near finger loops

18g stainless steel threadless taper pin for internally threaded or threadless jewelry designed by Jason Coale

The taper is 18g at its thickest point.

Please note, the red tapers in the images below is a 3D CAD drawing - the tapers you will be receiving are solid surgical stainless steel and are not red

Great to prevent jewelry slipping during insertion

Total length is only 14mm long (9/16")

Autoclave safe

16g stainless steel threadless taper pin for internally threaded or threadless jewelry designed by Jason Coale

The taper is 16g at its thickest point.

Please note, the red tapers in the images below is a 3D CAD drawing - the tapers you will be receiving are solid surgical stainless steel and are not red

Great to prevent jewelry slipping during insertion

Total length is only 14mm long (9/16")

Autoclave safe

14g stainless steel threadless taper pin for internally threaded or threadless jewelry designed by Jason Coale  The taper is 14g at its thickest point.
Please note, the red tapers in the images below is a 3D CAD drawing - the tapers you will be receiving are solid surgical stainless steel and are not red
Great to prevent jewelry slipping during insertion
Total length is only 14mm long (9/16")
Autoclave safe

Please be advised, these are for an .9mm thread pattern!

1 inch in length. Great for easily tapering in 16g jewelry. 316L Surgical Steel - autoclave safe and reusable.

Taper is 18g at its thickest point and has a .9mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part.

Measures 1 inch in length(25mm long)

Autoclave safe.

Taper is 10g at its thickest point and has a 2.0mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long) 

Autoclave safe.

Taper is 10g at its thickest point and has a 1.2mm x 2.0mm thread on the end. Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long)  

Autoclave safe.

Taper is 12g at its thickest point and has a 1.2mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. Measures 1 inch in length(25mm long) Autoclave safe.

Taper is 8g (3mm) at its thickest point and has a 2.0mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long) 

Autoclave safe.

1 inch in length. Great for easily tapering in 16g jewelry. 316L Surgical Steel - auto clave safe and reusable.

PTFE threading tool that works on both 16g & 14g PTFE.

You will receive 1 threading tool. On one side you can thread 16g - 1.2mm and on the other side you can thread 14g - 1.6mm

A two-in-one tool with a nice textured grip for easy threading.

Made from 410 ASTM Steel and is 3" (75mm) long and 8mm (5/16") thick.

6" Flat Nose Hemostat tool by Shawn O'Hare for Dermal Anchor Insertion.

410 ASTM Stainless Steel. The best tools on the market right now. With the flat nose of this hemostat, you can clamp any size dermal anchor head. Because the head of this hemostat is flat, inserting the dermal anchor remains flush against the body.

7" ring opening pliers with 3 notches and needle nose for tight spaces.

Opens ring to help in removing and inserting beads from captive rings.

Works best on rings from 5/16" to 1" in diameter and up to 4 gauge in thickness

The final product is something we are sure you will love. The end tapers to 2.0mm, you can fit this in the end of a 8g needle and slide it through.

3.0mm round diameter suspension hook.

These hooks are 70mm in length with a 7mm eye loop.

Space between tip and long base is 27.5mm.

This tool was designed by Jason Coale.

• 2.45" Long
• 14g Thick at the Rod
• .8mm Thick Head
• 2.8mm Wide Head

This tool is similar in design to a shoe horn. You would use this to drop the heel of the anchor into the hole much like a shoe horn. This tool also works well for removal.

14g 1 inch Threaded Taper - Perfect for Piercing with Internal Jewelry

Taper is 14g at its thickest point and has a 1.2mm thread on the end.

Use these to insert internally threaded jewelry or better yet. Buy 1" piercing needles, and use this to install internal jewelry in 1 simple motion.

The size of the taper is the thickest part.

Measures 1 inches long (25mm long)

5" pliers for small to medium rings. 410 ASTM surgical stainless steel and fully autoclavable. You can sterilize these repeatedly without rusting. These pliers have deep grooves on the head end for captive rings 1/2" and smaller.

Perfect tool for rings 20g - 8g

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 12g Needle to pass through with ease.

These forceps are for septums, but they also work very well for lining up nipple piercings, ear piercings, and even eyebrow piercings.

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 10g Needle to pass through with ease.

This is the true septum forcep. It has a big enough space under the tubes to allow the bridge of the nose to not get pinched when squeezing the forcep together.

What's the problem with the current tools on the market? They're too thick! With the help of Jonny Needles, this tool was developed.

This tool is so thin, that you can easily slide it under the dermal top without applying unnecessary pressure on the actual implant. The tool will grab the base and hold it in place so you can easily unscrew the top.

Tool is 5" long

It is only .25mm Thick and the hole in the middle of the clasp is 1.4mm wide.

Multi-purpose opener and closer. Autoclave and reuse. Not intended for heavy gauge rings. Not a replacement for traditional openers and closers.