Taper is 10g at its thickest point and has a 1.2mm x 2.0mm thread on the end. Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long)  

Autoclave safe.

Taper is 12g at its thickest point and has a 1.2mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. Measures 1 inch in length(25mm long) Autoclave safe.

Taper is 8g (3mm) at its thickest point and has a 2.0mm x 2.0mm thread on the end.

Use these to insert internally threaded jewelry. The gauge of the taper is the thickest part. 

Measures 1 inch in length(25mm long) 

Autoclave safe.

1 inch in length. Great for easily tapering in 16g jewelry. 316L Surgical Steel - auto clave safe and reusable.

PTFE threading tool that works on both 16g & 14g PTFE.

You will receive 1 threading tool. On one side you can thread 16g - 1.2mm and on the other side you can thread 14g - 1.6mm

A two-in-one tool with a nice textured grip for easy threading.

Made from 410 ASTM Steel and is 3" (75mm) long and 8mm (5/16") thick.

Tool is 5.5" long. It features a notched tip which makes it easy to hold dermal tops from 3mm up to 6mm in size.

This is an excellent tool for inserting dermal anchors and is the design choice of countless professionals.

Because of the notch, this will only grab the dermal top which makes it easier to insert.

6" Flat Nose Hemostat tool by Shawn O'Hare for Dermal Anchor Insertion.

410 ASTM Stainless Steel. The best tools on the market right now. With the flat nose of this hemostat, you can clamp any size dermal anchor head. Because the head of this hemostat is flat, inserting the dermal anchor remains flush against the body.

This 2" x 2" gauze is disposable, non-sterile, and non-woven.  

Great for cleaning up blood, removing ink, and cleaning most areas around the studio.

Gauze is 8 ply which means it folds out in 8 squares that are 2 inches by 2 inches.

Easily stored box of 200.

7" ring opening pliers with 3 notches and needle nose for tight spaces.

Opens ring to help in removing and inserting beads from captive rings.

Works best on rings from 5/16" to 1" in diameter and up to 4 gauge in thickness

This tool was designed by Jason Coale.

• 2.45" Long
• 14g Thick at the Rod
• .8mm Thick Head
• 2.8mm Wide Head

This tool is similar in design to a shoe horn. You would use this to drop the heel of the anchor into the hole much like a shoe horn. This tool also works well for removal.

14g 1 inch Threaded Taper - Perfect for Piercing with Internal Jewelry

Taper is 14g at its thickest point and has a 1.2mm thread on the end.

Use these to insert internally threaded jewelry or better yet. Buy 1" piercing needles, and use this to install internal jewelry in 1 simple motion.

The size of the taper is the thickest part.

Measures 1 inches long (25mm long)

Keeping bacteria and germs out of piercings is vital for safe healing. Medial Grade Saline-Spray Rinse contains the highest quality pharmaceutical grade sodium chloride (99.9% pure) as used in the medical industry.

Free of Sea Salt

Sea salt contains a variety of untested minerals, metals and even heavy metals that could have negative effects on an open wound. This is why medical professionals, hospitals and emergency rooms choose to use the pharmaceutical grade sodium chloride that’s used in this spray.

Quick Facts

• 2 oz. bottle
• Environmentally friendly, non-aerosol spray
• For oral and dermal piercings
• Natural medical-grade saline
• No alcohol or sea salt

Tattoo Goo® Deep Cleansing Soap is formulated to provide a broad-spectrum germicidal kill while being gentle to the skin.

The soap’s specially formulated cleansing agent PCMX-L cleans tattoos and dermal piercings at a deeper level to prevent bacterial growth and infection by removing more dirt and dead skin cells.

New healthy emerging layers of skin are exposed—an important step in tattoo healing and piercing aftercare.

5-1/2" pliers for medium to large rings. 410 ASTM surgical stainless steel and fully autoclavable. You can sterilize these repeatedly without rusting. These pliers have deep grooves on the head end for captive rings 5/8" and larger.

Perfect tool for rings 20g - 6g

5" pliers for small to medium rings. 410 ASTM surgical stainless steel and fully autoclavable. You can sterilize these repeatedly without rusting. These pliers have deep grooves on the head end for captive rings 1/2" and smaller.

Perfect tool for rings 20g - 8g

These are autoclavable if you wish to clean and reuse them. The Clips will withstand temperatures up to 160ºC

The metal spring is made from Manganese Steel and is Nickel Plated to avoid Rusting. Extremely light weight.

Pre-Packaged, Sterile, and comes with a black rubber band.

Measurements:

• Slotted end has a 4mm gap
• Triangle Hole is 7mm across and 7mm tall
• 70mm total length
• 19mm width at the handle
• 15mm width at the triangular head
• 16mm tall
• Mouth can open 16mm when handle is compressed

Presterilized Plastic Piercing Rounded Forcep - Disposable or Autoclavable.

These are autoclavable if you wish to clean and reuse them. The Clips will withstand temperatures up to 160ºC

The metal spring is made from Manganese Steel and is Nickel Plated to avoid Rusting. Extremely light weight.

Pre-Packaged, Sterile, and comes with a black rubber band.

Measurements:

• Slotted end has a 4mm gap
• Round Hole is 9mm across and 9mm tall
• 70mm total length
• 19mm width at the handle
• 17mm width at the round head
• 16mm tall
• Mouth can open 16mm when handle is compressed

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 12g Needle to pass through with ease.

These forceps are for septums, but they also work very well for lining up nipple piercings, ear piercings, and even eyebrow piercings.

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 10g Needle to pass through with ease.

This is the true septum forcep. It has a big enough space under the tubes to allow the bridge of the nose to not get pinched when squeezing the forcep together.

200 Bamboo Toothpicks for use with our Gentian Violet ink.

Perfect combination for marking procedure points.

Each toothpick measures 2mm thick and 65mm long

Tool measures 60mm long and is 4mm thick and has a 1.2mm thread pattern on the end.

Use these to insert internally threaded jewelry or your dermal anchors.

These silicone pen sleeves work with stainless steel surgical skin markers to make holding the pen during long procedures much more comfortable.

This sleeve comes in blue and is reusable and autoclave safe.

This surgical skin pen was made as a compact disposable sterile marking pen in order to cut down on waste and save money, and at the same time remain versatile.  These pens are great for piercings and other small markings on the skin while keeping costs down.

If you are working on a larger project that will take some time- unscrew one of these tips and pop them onto one of the Precision steel tubes for long term comfort.  Add on one of the silicone grips to make your job even easier.

How to Use:

1. Clean skin area thoroughly with an alcohol prep or swab. Be certain to dry the area completely.
2. Carefully mark the cleaned skin area. Allow skin markings to dry.
3. Prep normally over marked site. Markings will remain permanent.

What's the problem with the current tools on the market? They're too thick! With the help of Jonny Needles, this tool was developed.

This tool is so thin, that you can easily slide it under the dermal top without applying unnecessary pressure on the actual implant. The tool will grab the base and hold it in place so you can easily unscrew the top.

Tool is 5" long

It is only .25mm Thick and the hole in the middle of the clasp is 1.4mm wide.

Multi-purpose opener and closer. Autoclave and reuse. Not intended for heavy gauge rings. Not a replacement for traditional openers and closers.

Measures 18 gauge to 1" gauge. Perfect gift for the professional piercer in your life. Autoclave and re-use again and again!

Ring Opening Pliers with 3 Notches and a needle nose for tight spaces.

Opens captive rings to help in removing and inserting beads.

Works best on rings from 1/4" to 3/4" in diameter, and up to 6 gauge in thickness.