5-1/2" pliers for medium to large rings. 410 ASTM surgical stainless steel and fully autoclavable. You can sterilize these repeatedly without rusting. These pliers have deep grooves on the head end for captive rings 5/8" and larger.

Perfect tool for rings 20g - 6g

5" pliers for small to medium rings. 410 ASTM surgical stainless steel and fully autoclavable. You can sterilize these repeatedly without rusting. These pliers have deep grooves on the head end for captive rings 1/2" and smaller.

Perfect tool for rings 20g - 8g

These are autoclavable if you wish to clean and reuse them. The Clips will withstand temperatures up to 160ºC

The metal spring is made from Manganese Steel and is Nickel Plated to avoid Rusting. Extremely light weight.

Pre-Packaged, Sterile, and comes with a black rubber band.

Measurements:

• Slotted end has a 4mm gap
• Triangle Hole is 7mm across and 7mm tall
• 70mm total length
• 19mm width at the handle
• 15mm width at the triangular head
• 16mm tall
• Mouth can open 16mm when handle is compressed

Presterilized Plastic Piercing Rounded Forcep - Disposable or Autoclavable.

These are autoclavable if you wish to clean and reuse them. The Clips will withstand temperatures up to 160ºC

The metal spring is made from Manganese Steel and is Nickel Plated to avoid Rusting. Extremely light weight.

Pre-Packaged, Sterile, and comes with a black rubber band.

Measurements:

• Slotted end has a 4mm gap
• Round Hole is 9mm across and 9mm tall
• 70mm total length
• 19mm width at the handle
• 17mm width at the round head
• 16mm tall
• Mouth can open 16mm when handle is compressed

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 12g Needle to pass through with ease.

These forceps are for septums, but they also work very well for lining up nipple piercings, ear piercings, and even eyebrow piercings.

6" long high quality 410 Surgical steel Septum Forcep.

Head "receiving tubes" are big enough to allow up to a 10g Needle to pass through with ease.

This is the true septum forcep. It has a big enough space under the tubes to allow the bridge of the nose to not get pinched when squeezing the forcep together.

Tool measures 60mm long and is 4mm thick and has a 1.2mm thread pattern on the end.

Use these to insert internally threaded jewelry or your dermal anchors.

What's the problem with the current tools on the market? They're too thick! With the help of Jonny Needles, this tool was developed.

This tool is so thin, that you can easily slide it under the dermal top without applying unnecessary pressure on the actual implant. The tool will grab the base and hold it in place so you can easily unscrew the top.

Tool is 5" long

It is only .25mm Thick and the hole in the middle of the clasp is 1.4mm wide.

Multi-purpose opener and closer. Autoclave and reuse. Not intended for heavy gauge rings. Not a replacement for traditional openers and closers.

Measures 18 gauge to 1" gauge. Perfect gift for the professional piercer in your life. Autoclave and re-use again and again!

Ring Opening Pliers with 3 Notches and a needle nose for tight spaces.

Opens captive rings to help in removing and inserting beads.

Works best on rings from 1/4" to 3/4" in diameter, and up to 6 gauge in thickness.

Get the accuracy you need with the WEN Digital Caliper. 

The WEN calipers are designed to undergo four different methods of measurement, including inner, outer, step, and depth measurements. The large LCD digital readout provides users accurate and easy-to-see readings in either metric, imperial or fractional units with a resolution of .0005 inches, .01 millimeters, or 1/128 inches. 

This package includes a CR2032 3V battery as well as a sturdy carrying case for safely storing and transporting your caliper. And, because its a WEN product, your digital caliper comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer helpline.

• Switch between SAE (inches), metric (millimeters), and SAE fractional units
• Takes measurements up to 6.1 inches in size
• Resolutions of .0005 inches, 1/128 inches, or .01 millimeters provide maximum accuracy
• Includes a large digital LCD readout, a sturdy carrying case, and a 3V CR2032 battery
• Backed by a two-year warranty

Warranty Information:
Your WEN Digital Caliper is protected by a two-year warranty. If you experience any issues with your caliper, contact the manufacturer directly for support and repairs. 

Threaded Taper for Internally threaded Jewelry, Dermal Anchors, etc..

Taper is 14g at its thickest point and has a 1.2mm thread on the end.

Use these to insert internally threaded jewelry or your dermal anchors. The size of the taper is the thickest part. Measures 4 inches long.

Tweezer style triangle end forceps with locking mechanism.

Great alternative to regular forceps due to being lighter and smaller than regular forceps. Easy to use with one hand. 

These tweezer forceps are approximately 5-3/4". They have a 12mm head with a 7mm inner hole diameter.

These forceps are only available without slots.

4-1/2" tweezers with end designed to hold a ball or bead snugly.  Great for picking small balls and beads out of loose jewelry bins or displays.

5" in length.

Double action spring. Surgical stainless steel. Long, round nose/tip. Fully autoclavable - you can sterilize this tool repeatedly without worrying about rusting.

Bend the perfect nostril screw every time! Over the years we have heard many piercers ask for either shorter or longer nostril screws, or screws with more acute or obtuse bends on the end.

This tool eliminates those problems. Use this tool with out U-Bend nostril pins.

You pick the wearable area, and the degree of the screw bend. Scroll down for detailed instructions on how to use this item.

Crafted from 410 ASTM Stainless Steel.

Mini Ring Opening Pliers - Perfect for Tight Places.

Opens ring to help in removing and inserting beads from captive rings.

Works best on rings from 1/4" to 3/8" in diameter and up to 14 gauge in thickness. 

Great ring opening pliers for when doing tragus, eyebrow, ear, or any small, tight piercings.

5 inch ring opening pliers with 2 notches for opening and a needle nose tip for tight spaces.

Opens captive rings to help in removing and inserting beads.

Works best on rings from 1/4" to 5/8" in diameter, and up to 8 gauge in thickness.

5" in length curved "mosquito" hemostat.  

Curved end for hard to reach areas. Great for picking up jewelry, holding piercing needles or to insert dermal anchors.

5" in length, 410 ASTM steel. Straight mosquito hemostat forceps.  Great for picking or holding up small parts during procedures. Small tip works well in tight spaces.

Plastic gauge wheel measures jewelry from 18 gauge to 1" gauge.

Comes in black plastic. Great low cost alternative to the steel wheels.