Binding post screw with knurled head.

Each screw is 12mm in length. Top screw head is 3.0mm thick with an 8mm diameter.

Thread post length is 7.5mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

Binding post screw with knurled head.

Each screw is 12mm in length. Top screw head is 4mm thick with an 8mm diameter.

Thread post length is 7.5mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

This rear binding post is made of copper. 

Each post is 10mm long and 8.0mm in diameter.  

The diameter of the threaded hole for the contact screw is 4.0mm.

Thread length (distance between each thread) is 0.7mm which makes it M4 Metric.

Price is for one piece so take advantage of our quantity discounts so that you have extras on hand!

This rear binding post is made of copper. 

Each post is 10mm long and 9.0mm in diameter.  

The diameter of the threaded hole for the contact screw is 4.0mm.

Thread length (distance between each thread) is 0.7mm which makes it M4 Metric.

Price is for one piece so take advantage of our quantity discounts so that you have extras on hand!

100 Per Bag. Used to attach the Needle Bar Loops to your Armature Bar A different approach to traditional rubber nipples. These allow for a better tighter fit.

.016" Thick Tapered Blue Carbon Steel Back Spring

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

Your standard coil machine needs tuning from time to time. The spring flake adjuster tool is perfect for aligning the armature bar with the front and back springs, to keep the machine running smoothly.

The entire tool is made from 316L stainless steel. The big block portion measures 78mm long and 20mm wide, while the inside portion is 10mm wide and 9mm tall.

Please be advised you are only purchasing the tool. No armature bars or springs are included in your purchase.

Steel non-slip foot switch material: steel with non-slip rubber on the bottom is reliable, small and durable.

Comes with a 1/4" inch phono plug.

Acts as on/off switch for power supply.

Perfect for both tattooing and permanent makeup procedures, this Precision brand Medical Mini Cling Film Wrap helps maintain safe and hygienic procedures. 

Also great for pre-operative numbing and post-operative cosmetic procedures like microblading. It is made from breathable PE material that is Food Grade and safe for the body. 

This mini cling film roll comes in an easy-to-use box that features an in-built rotating wheel mechanism and cutter.

These Premium Pro Design RCA Cables are some of the best copper-tip RCA connectors available in the industry! Take the Pepsi Challenge and see for yourself!
Each of these silicone RCA cable measures 8 feet in length, has a green phono (RCA) plug on one end, and has a 1/4" jack mono plug on the opposing end.
The silicone wire reduces tangling, and this RCA cable is extremely lightweight. If you need a new RCA cable to power your tattoo machine, you won't find another that's better than these Premium Pro Design RCA Cable by Precision!

These Premium Pro Design RCA Cables are some of the best copper-tip RCA connectors available in the industry! Take the Pepsi Challenge and see for yourself!
Each of these silicone RCA cable measures 8 feet in length, has a blue phono (RCA) plug on one end, and has a 1/4" jack mono plug on the opposing end.
The silicone wire reduces tangling, and this RCA cable is extremely lightweight. If you need a new RCA cable to power your tattoo machine, you won't find another that's better than these Premium Pro Design RCA Cable by Precision!

Black 1 ft. Long Phono Tip Connector Cable for Cheyenne Hawk Machines by Precision Supplies

Use this affordable, high quality connector cord by Precision Supplies for a reliable connection to your Hawk machine. This cord is designed to work with a Hawk power cord to connect your Hawk machine to power supplies with a phono jack. It is 1 foot long with a 1/4” jack mono plug and includes a Velcro strap for easy storage.

Specifications:

• Cord Length: 1 ft.
• 1/4” jack mono plug
• Compatible with Cheyenne Hawk machines and power supplies with a phono jack
• Velcro strap included for easy storage
• Affordable without compromising quality
• Manufactured by Precision Supplies

This RCA to Clip Cord Converter made by Precision will quickly and easily adapt spring-style clip cord tattoo machines to be used with an RCA cord. Very reliable and strong connection.
One one end you will find 304 stainless steel insulated spring-style clips that will fit with any clip cord based machine and the other end has a phono/RCA jack end for RCA cables to a power supply.
This compact 3” adapter style helps keep your work area and tools clutter-free.
Pick one up now at this incredible price!

As a professional permanent cosmetic artist, you're going to want to pick-up this permanent makeup tattoo machine by Precision.

This little feature packed machine is great for cosmetic tattoos, such as eye and lip procedures. The machine itself is lightweight, weighing only 60g and compact, measuring approximately 4" long with a 3/4" circumference.

Easily control the speed of this machine by adjusting the voltage on your power supply (please keep in mind that if the voltage is too high, it will cause the motor to burn).

This pen-style machine also features a tip that unscrews for easier clean-up.

This listing is for the machine only. You will need to purchase the clip cord, foot pedal, and power supply separately.

Our stock availability on this item fluctuates rapidly.  If you purchase this item, please allow up to three business days for us to fill your order.  Please call if you would like to check availability.  Thanks for your understanding!

Permanent makeup machine stand and holder. Perfect if you want to display retired machines, collector machines or just to keep your current machines in line and at your disposal.

Please note: you are only purchasing this stand, the machine does not come with your purchase.

Pick up a bag of these Tattoo Ink Finger Cup Rings for an ultra convenient way of conducting your procedures.
Keep a steady hand and this ink cup ring will provide easy accessibility to the pigments being used during procedures.
These plastic cosmetic ink cup rings are "one size fits most" and are about the size of a #9 (small) tattoo ink cup.

You are purchasing 1 bag of 100 ink cup ring holders.

Conveniently and neatly arrange your needle cartridges for quick changes and save time identifying cartridge sizes with these disposable cartridge holder disposable trays.
Each lightweight clear plastic tray is designed to hold up to five cartridge needles at an angle so you can easily and quickly grab one. Placement is sturdy and reliable.
These trays are compatible with most cartridge needle brands on the market right now.
The trays also feature a reservoir at one end to catch residual tattoo ink during procedures.

Have you been wanting to get into using cartridges and cartridge grips but prefer using a coil machine? Now you can! With this simple and inexpensive conversion kit, using cartridge grips with your vice and/or coil tattoo machine is now easier and more affordable than ever!

Installation is super easy – simply insert the adaptor and tighten.

Two plunger bars that will fit perfectly with the adaptor are also included with this purchase.

This armature bar is lightened for fast lining. It has 5 holes drilled through the side, a portion of the bar cut out of it and is made of oil blackened iron.

Bar itself measures 40mm long and it a total of 46mm in length with the peg.  11mm wide and 5mm thick.

The peg itself is 6mm long and 3.5mm thick. 

The screw hole is M4 metric with a 0.7mm thread length. 

These individual back springs, made by Precision, are designed to work with any conventional armature bar.
They have a slot that allows for easy installation and removal.
They are sold flat so that you can adjust them to suit your application.
No loss of temper in the steel which means perfect springs every time.
The unique, innovative design controls were the spring flexes. Tabs are shipped flat which allows you to use o-rings if desired.

Perfect screw to have on hand at all times.  Grab a few of these so you will never have to sweat losing one from your grips.

These are great for our plastic and steel grips.  Machines from 304 stainless steel so you won't have to worry about it rusting.

5mm width and 6mm tall.

These M4 Metric copper contact screws have a total length of 35mm.

The threaded post is 25mm long and the screw head measures 10mm thick and has a diameter of 6mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

These M4 Metric copper contact screws have a total length of 32mm.

The threaded post is 25mm long and the screw head measures 7mm thick and has a diameter of 8mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

These M4 Metric copper contact screws have a total length of 32mm.

The threaded post is 27mm long and the screw head measures 5mm thick and has a diameter of 6mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

These M4 Metric copper contact screws have a total length of 32mm.

The threaded post is 25mm long and the screw head measures 7mm thick and has a diameter of 8mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

These M4 Metric copper contact screws have a total length of 32mm.

The threaded post is 25mm long and the screw head measures 7mm thick and has a diameter of 8mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

These M4 Metric copper contact screws have a total length of 32mm.

The threaded post is 26mm long and the screw head measures 6mm thick and has a diameter of 7mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.