Bar itself measures 40mm long and it a total of 46mm in length with the peg.  11mm wide and 5mm thick. The peg itself is 6mm long and 3.5mm thick.  The screw hole is M4 metric with a 0.7mm thread length. 

250 Ink Cups with Base Size # 25 for Tattoo Ink

Plastic Ink Cups Size #25. Perfect clear ink cups with stable flat bottom base,

You are buying one bag. Each Bag contains 250 #25 Ink Cups.

There is a wide base which eliminates the need for ink cup holders.

1oz of ink is approximately 1000 drops

#25 ink cups hold approx 300 drops

These M4 Metric brass contact screws have a total length of 27mm.

The threaded post is 20mm long and the screw head measures 7mm thick and has a diameter of 8mm.

The thread length (or distance of each thread) is 0.7mm

Price is per one. Take advantage of our quantity discounts so you have more on hand.

This rear binding post is made of brass. 

Each post is 10mm long and 8.0mm in diameter.  

The diameter of the threaded hole for the contact screw is 4.0mm.

Thread length (distance between each thread) is 0.7mm which makes it M4 Metric.

Price is for one piece so take advantage of our quantity discounts so that you have extras on hand!

Binding post screw with knurled head.

Each screw is 14mm in length. Top screw head is 6mm thick with an 8mm diameter.

Thread post length is 8.0mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

Binding post screw with knurled head.

Each screw is 13mm in length. Top screw head is 5mm thick with an 8mm diameter.

Thread post length is 8mm with a distance between each thread at 0.7mm

Metric M4 Screw Thread

190+ Individual Parts.

Maintain or rebuild your machine with everything you need all found in a double sided tackle style box.

Parts you will receive:

• Hex Flat Head Screws
• Hex Semisphere Head Screws
• Hex Column Head Screws
• Nylon Screws
• Hex Socket Set Screws with Cup Point
• Front Binding Posts
• Rear Binding Posts
• Steel Washers
• Nylon Washers
• Solder Lugs
• Nonleaded Solder
• Heatshrink Tubing
• Capacitors
• Coils
• Grommets and Nipples
• Jumper Wire

Also, check the list on the image below for further reference.

This stool has a 16" wide seat (40cm) and sits at a height of 17" (44cm) and is adjustable up to 20" (53cm).

The feet sit approximately 29" (75cm) and the cushioned seat sit at about 3.5" (9cm) high.

Seat is leather with a sponge insert. Legs and feet are plastic.

Great shop stool. Also would work great for mechanics, car detailers, salons, and permanent makeup techs. 

Comes unassembled in 3 parts and is very easy to put together.

4.6mm round diameter suspension hook.

70mm is the total Length from top of eye loop to curve.
6mm eye loop hole.
The hook part itself is 4.6mm thick. It is not really 6g, it is more like a 5g. 
Gap between tip and long base is 28mm

Before these suspension hooks were put on the market, each prototype was tweaked until it perfection.

The final product is something we are sure you will love. The end tapers to 2.5mm, you can fit this in the end of a 6g needle and slide it through.

4g Sea Demon Suspension Flat hook.

These hooks are 4" (100mm) in length with a 7mm eye loop which is wide enough for links to fit through.

Space between tip and long base is 1-3/4" (45mm).

Before these suspension hooks were put on the market, each prototype was tweaked until it perfection.

The final product is something we are sure you will love. The end tapers to 2.0mm, you can fit this in the end of a 4g needle and slide it through. Designed after the Mustad Sea Demon Fishing Hooks.

Ultra Thin Mini Flat Tattoo Pedal with 8ft Cord - Stainless Steel. Very little pressure is needed to get the machine going, enabling you to tattoo for hours without your foot getting tired! Thinner than a pen and grips the floor.

Length: 4.25" X Width: 1.25" X Height: 0.25"

There are different classes of indicators and process indicators are not the same as biological indicators. Process indicators are the colored arrows, dots, etc., on the outside of sterile packaging and simply indicate that the item has gone through the process and is not considered actual proof of sterilization. It is a quick visual reference for the worker, client, etc. to ensure it has been sterilized, but biological indicators (spore testing) is still the only acceptable proof of sterilization.

For example, most autoclaves used by operators in shop, are heat and steam under pressure (as opposed to EO gas). Packaging for autoclaves that responds to steam would change color if you held them over a kettle (as they react to steam). Obviously that would not be considered sterilization. By Using a internal indicator your further showing your customers that the jewelry was actually placed inside an autoclave and was sterilized.

Packing: 40pcs/each paper, 25pcs papers/box(1000pcs/box)

These are autoclavable if you wish to clean and reuse them. The Clips will withstand temperatures up to 160ºC

The metal spring is made from Manganese Steel and is Nickel Plated to avoid Rusting. Extremely light weight.

Pre-Packaged, Sterile, and comes with a black rubber band.

Measurements:

• Slotted end has a 4mm gap
• Triangle Hole is 7mm across and 7mm tall
• 70mm total length
• 19mm width at the handle
• 15mm width at the triangular head
• 16mm tall
• Mouth can open 16mm when handle is compressed

Presterilized Plastic Piercing Rounded Forcep - Disposable or Autoclavable.

These are autoclavable if you wish to clean and reuse them. The Clips will withstand temperatures up to 160ºC

The metal spring is made from Manganese Steel and is Nickel Plated to avoid Rusting. Extremely light weight.

Pre-Packaged, Sterile, and comes with a black rubber band.

Measurements:

• Slotted end has a 4mm gap
• Round Hole is 9mm across and 9mm tall
• 70mm total length
• 19mm width at the handle
• 17mm width at the round head
• 16mm tall
• Mouth can open 16mm when handle is compressed

These are the light tables we use in our studios, 717 Tattoo.  Compact, lightweight, and portable lightbox.  Powerful unit perfect for tracing out your designs.

Virtually zero hot-spots on this unit.  Comes with a North American cord set and instructions.

The aluminum frame is ultra thin, sitting at only 7/16" high. 

Light source is from LED's and has a bulb life of about 50,000 to 100,000 hours. No heat and very low energy consumption.

Frame size: 36.2 x 27.5 x 1.0cm and view size is 29.7 x 21.0cm (A4) 8.5x11.5"

An internal switch detects votage from either 110v or 220v. 110v is the standard North American voltage. 220v is for international. You will need an international cordset for 220v.

Your standard coil machine needs tuning from time to time. The spring flake adjuster tool is perfect for aligning the armature bar with the front and back springs, to keep the machine running smoothly.

The entire tool is made from 316L stainless steel. The big block portion measures 78mm long and 20mm wide, while the inside portion is 10mm wide and 9mm tall.

Please be advised you are only purchasing the tool. No armature bars or springs are included in your purchase.

Use this tool to align your armature bar on your tattoo machine for a perfect center alignment. Great tool to have to fine tune your machines. Made from 316L Steel and super polished. Its so easy to use, you just insert it in place of a back stem and set the needle bar of your armature bar into the groove. This will align and square up your needle bar directly in the center of the tube.

These silicone pen sleeves work with stainless steel surgical skin markers to make holding the pen during long procedures much more comfortable.

This sleeve comes in blue and is reusable and autoclave safe.

Perfect screw to have on hand at all times.  Grab a few of these so you will never have to sweat losing one from your grips.

These are great for our plastic and steel grips.  Machines from 304 stainless steel so you won't have to worry about it rusting.

4mm width and 5mm tall.

Made of polypropylene and has a melting point of 300 degrees Fahrenheit.

Fits #9 (small) and #16 (large) ink caps / ink cups.  Holds a total of six ink caps; two large and four small.  

Prevent cross contamination with these arm disposable sleeves.  Great for use while tattooing, piercing, tattoo removal, or permanent cosmetic procedures.  These do an amazing job of keeping ink and blood off your arms and clothes. Great for doing large, elaborate tattoos when you need to be careful where you lean because when you wear a tattoo sleeve you no longer have to worry.

You will receive a box of 100 individual sleeves.

Size:7.8" inches in diameter and 15.7" inches in length.  One size fits most people from wrist to elbow. 

Made of plastic and blue in color, these disposable sleeves come in an easy to use dispenser box.

Each sleeve has 2 elastic ends to keep the sleeve secured in place.

Standard clip cord for tattoo machines. 8 ft. clip cord with 1/4" phono jack plug.

Available in black.