Level up your stroke game with the Peak Solice Pro, the very first Peak wireless machine to offer a fully adjustable stroke. Simply turn the stroke adjustment knob and you can change your stroke from 2.4mm up to 4.2mm. That makes the Peak Solice Pro an excellent choice for any style of tattooing.

Switch effortlessly between an RCA and wireless setup using the detachable RCA module. This pen-style machine comes equipped with a PowerPack battery that gives you hours of tattooing power on a single charge; the battery is also detachable so you can easily switch to a wired setup.

Use the Peak Solice Pro battery pack on any machine using the two included battery pack converters. These converters turn the PowerPack battery into a separate battery pack that’s compatible with RCA and 3.5mm input machines.

With your purchase, you will receive: 

• 1 PowerPack battery
• 1 RCA Module
• 2 Battery Pack Converters (3.5mm + RCA inputs)
• 3 O-rings
• 2 Allen keys
• 1 spare fly wheel
• 1 USB-C charging cable
• and 1 RCA cord

Technical Specifications:

• Wireless tattoo machine; can switch to an RCA setup
• Aluminum construction and lightweight body
• Net Weight: 7.2oz (with PowerPack)
• Machine Length: 5” (with PowerPack)
• Adjustable Stroke: 2.4mm–4.2mm
• Employs a 1827 coreless motor
• Operating voltage: 4v–12v; recommended not to exceed 10v
• Comes with RCA module for a standard, wired setup
• Average Run Time: ~4–7 hours (with standard settings)
• Chargeable by USB-C

Switch effortlessly between an RCA and wireless setup using the detachable RCA module. This pen-style machine comes equipped with a PowerPack battery that gives you hours of tattooing power on a single charge; the battery is also detachable so you can easily switch to a wired setup.

Use the Peak Solice Pro battery pack on any machine using the two included battery pack converters. These converters turn the PowerPack battery into a separate battery pack that’s compatible with RCA and 3.5mm input machines.

With your purchase, you will receive: 

• 1 PowerPack battery
• 1 RCA Module
• 2 Battery Pack Converters (3.5mm + RCA inputs)
• 3 O-rings
• 2 Allen keys
• 1 spare fly wheel
• 1 USB-C charging cable
• and 1 RCA cord

Technical Specifications:

• Wireless tattoo machine; can switch to an RCA setup
• Aluminum construction and lightweight body
• Net Weight: 7.2oz (with PowerPack)
• Machine Length: 5” (with PowerPack)
• Adjustable Stroke: 2.4mm–4.2mm
• Employs a 1827 coreless motor
• Operating voltage: 4v–12v; recommended not to exceed 10v
• Comes with RCA module for a standard, wired setup
• Average Run Time: ~4–7 hours (with standard settings)
• Chargeable by USB-C

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.

This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.

Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

Unleash your large-scale ideas on this tattooable backpiece. The tattooable backpiece is lightweight with an even surface, so you can tattoo all your wildest full back panel ideas in miniature and with abandon. Showcase your full-back work to clients when you’re done… then book them for some real-life back panel tattoos.

Dimensions:

11” (W) x 17” (L) x .25” thick

Stencil Application Tips:

1. Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it
2. Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel
3. Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface
4. Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
5. Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
6. Peel away your stencil carefully.
7. Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

Unleash your large-scale ideas on this tattooable backpiece. The tattooable backpiece is lightweight with an even surface, so you can tattoo all your wildest full back panel ideas in miniature and with abandon. Showcase your full-back work to clients when you’re done… then book them for some real-life back panel tattoos.

Dimensions:

11” (W) x 17” (L) x .25” thick

Stencil Application Tips:

1. Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it
2. Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel
3. Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface
4. Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
5. Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
6. Peel away your stencil carefully.
7. Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

No more tattooing real grapefruits… they go bad, anyway.

Round, juicy, and GMO-free, these tattooable grapefruit is fresh out of its molding and ready for your masterworks. Add this iconic tattooable hunk of nostalgia to your 3D portfolio and grow your skills on life-like flesh…. In fruit form.

Note: As with all Grapefruits, the color is never 100% the same. You can expect a rich yellowish color similar to the picture, but it won't always be exact.

Dimensions:
~3.5” diameter

Key Features:

• Molded into a grapefruit shape
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques

Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.

This tattooable Cutie Doll is waiting for your stencils. Don’t worry; it sits (well, stands) like a champion.
And it won’t cry one bit. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos.
Once you’ve tattooed it, set it up using the included display platform and rod. It’ll be sure to turn heads in your studio or at your next convention.

Dimensions:

• Doll: ~10.5” (L) x 7.5” (W); 4” height
• Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

This tattooable Cutie Doll is waiting for your stencils. Don’t worry; it sits (well, stands) like a champion.
And it won’t cry one bit. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos.
Once you’ve tattooed it, set it up using the included display platform and rod. It’ll be sure to turn heads in your studio or at your next convention.

Dimensions:

• Doll: ~10.5” (L) x 7.5” (W); 4” height
• Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

This tattooable Cutie Doll is waiting for your stencils. Don’t worry; it sits (well, stands) like a champion.
And it won’t cry one bit. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos.
Once you’ve tattooed it, set it up using the included display platform and rod. It’ll be sure to turn heads in your studio or at your next convention.

Dimensions:

• Doll: ~10.5” (L) x 7.5” (W); 4” height
• Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 28” x 40” Fitzpatrick tone 5 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~28” (W) x 40” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 28” x 40” Fitzpatrick tone 4 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~28” (W) x 40” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 28” x 40” Fitzpatrick tone 3 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~28” (W) x 40” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 10.5” x 22” Fitzpatrick tone 5 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~10.5” (W) x 22” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 10.5” x 22” Fitzpatrick tone 4 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~10.5” (W) x 22” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 10.5” x 22” Fitzpatrick tone 3 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~10.5” (W) x 22” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.

Showcase your work with this 10.5” x 22” Fitzpatrick tone 2 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.

Dimensions: ~10.5” (W) x 22” (L); 3mm Thick

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.

This tattooable Cutie Doll is waiting for your stencils. Don’t worry; it sits (well, stands) like a champion.
And it won’t cry one bit. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos.
Once you’ve tattooed it, set it up using the included display platform and rod. It’ll be sure to turn heads in your studio or at your next convention.

Dimensions:

• Doll: ~10.5” (L) x 7.5” (W); 4” height
• Display Rod: 3.5” (L) x 0.5” (W)

Key Features:

• Molded to resemble a baby doll
• Life-like in size and shape
• Made with silicone and rubber-based materials
• Apprentices and beginners can practice tattooing techniques
• Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
• Comes with display platform + rod

Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.