From Our Tattoo Shops to Yours
World's Largest Tattoo Convention Supplier
Largest Van Delivery Service on the East Coast
Independently Owned & Operated
Professionals Only
From Our Tattoo Shops to Yours
World's Largest Tattoo Convention Supplier
Largest Van Delivery Service on the East Coast
Independently Owned & Operated
Professionals Only
From Our Tattoo Shops to Yours
World's Largest Tattoo Convention Supplier
Largest Van Delivery Service on the East Coast
Independently Owned & Operated
Professionals Only
From Our Tattoo Shops to Yours
World's Largest Tattoo Convention Supplier
Largest Van Delivery Service on the East Coast
Independently Owned & Operated
Professionals Only
From Our Tattoo Shops to Yours
World's Largest Tattoo Convention Supplier
Largest Van Delivery Service on the East Coast
Independently Owned & Operated
Professionals Only
From Our Tattoo Shops to Yours
World's Largest Tattoo Convention Supplier
Largest Van Delivery Service on the East Coast
Independently Owned & Operated
Professionals Only
Choose your Location
-
Razorblade HQ
Free
Usually ready for pickup in 24 hours
22 N Cameron St, Harrisburg, PA 17101
📞 (+1) 212-456-7890
🕐 Mon – Fri: 8:30 am – 10:30 pm
Sat: 8:30 am – 10:30 pm
Sun: Closed
Subheading
Product comparison
Describe you product comparison grid
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
112 products
112 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$1.49
14g and 12g Thin Jeweled Disc Top for Internally Threaded Jewelry. Use with our MicroDermal Anchors or Labret Post
Material is 316L ASTM F-138 Implant Grade Stainless Steel. You are only buying 1 end. You will need to buy the jewelry to attach it to separately.. Thread length is 2mm. Thread pattern is 1.2mm which means you can use on a 14g or 12g barbell piece of body jewelry that uses this thread pattern. Made from 1 solid piece of material
$1.19
18g–16g Stainless Steel Jewel Ball — Pick Jewel Size and Color — Internal 0.9mm
These steel jewel balls for 18g and 16g internally-threaded body jewelry are available in 16 colors and 4 sizes, including 1.5mm, 2mm, 2.5mm, and 3mm. Each ball and its internal 0.9mm threaded post are made from a single piece of surgical stainless steel with a bezel-set jewel. You can use these replacement jewel balls with any 18g or 16g internally-threaded body jewelry with a matching internal 0.9mm thread pattern.
The 18g–16g Internally Threaded Steel Jewel Ball is priced per one top.
Specifications
- Material: 316L ASTM F-138 Implant Grade Stainless Steel
- Jewel Size Options: 1.5mm–3mm (1/16”–1/8”)
- Threading: Internal 0.9mm
- 16 Jewel color options
- Price per one ball
From $0.50
14g to 8g Steel Replacement Ball for Externally Threaded Jewelry
These will thread onto any of our 14g, 12g, 10g, or 8g body jewelry with a matching external 1.6mm thread pattern.
$2.99
Threadless Titanium Replacement Top - Plain Balll
0.45mm Threadless Shaft. Compatible with 0.5mm Threadless Jewelry
Change up the look of your jewelry quickly and easily
Over a hundred combinations to choose from!
How to Use Threadless Jewelry:
Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place.
Follow the instructions below to secure the threadless end into the threadless shaft
- Insert the pin one-third to halfway into the shaft.
- Hand-bend slightly the insertion pin against the shaft.
- Push the end into the shaft and test the fit.
- Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.
$1.49
Available in various sizes.
Material is 316L ASTM F-138 Implant Grade Stainless Steel.
You are only buying 1 End. You will need to buy your jewelry separately.
Use these with our microdermal anchors or labret posts.
Thread length is 2mm Thread pattern is 1.2m
Made from 1 solid piece of steel
$1.50
Solid titanium half-ball which is currently available in 2, 2.5, 3 or 4mm. These can be used with any of our 18g to 16g jewelry with internal 0.9mm thread pattern.
Post length is approximately 1.5mm. The ball is manufactured from exceptional quality, solid titanium, which makes it almost completely hypo-allergenic and lending itself to safe extended wear. Also comes in a number of jeweled colors AND anodized colors.
$1.79
Pick-up some of these countersunk, 316L implant-grade surgical steel balls to replace missing balls for any of your 6g internally-threaded body jewelry with an internal 2mm thread pattern.
Use them on straight, circular (horseshoes), curved barbells or any other style of jewelry with a matching thread pattern and gauge.
They're made of 316L surgical stainless steel, countersunk for a perfect fit every time, and available in your choice of 6mm, 8mm, 11mm or 13mm sizes.
Please note that these steel balls will only work with internally-threaded body jewelry with an internal 2mm thread pattern. Each surgical steel replacement ball is sold individually
$1.39
Steel Disc available in 3mm,4mm, 5mm, 6mm, or 8mm sizes.
Perfect for any of our internally threaded jewelry with a 1.2mm thread pattern.
Material is 316L ASTM F-138 Implant Grade Stainless Steel
You are only buying 1 End. You will need to buy the jewelry separately.
Use with our MicroDermal Anchors or Labret Posts.
Thread length is 2mm
Thread pattern is 1.2m
Made from 1 solid piece of material
$0.35
18g - 16g Loose Steel External Thread Cone Ends.
Fits any piece of our jewelry from 16g to 18g.
External 1.2mm thread pattern.
$0.50
316L ASTM F-138 Stainless Steel loose threaded balls. These will thread onto ANY of our 18g or 16g body jewelry with a matching external 1.2mm thread pattern.
$1.89
Pick-up some of these countersunk, 316L implant-grade surgical steel balls to replace missing balls for any of your 4g internally-threaded body jewelry with an internal 2mm thread pattern.
Use them on straight, circular (horseshoes), curved barbells or any other style of jewelry with a matching thread pattern and gauge.
They're made of 316L surgical stainless steel, countersunk for a perfect fit every time, and available in your choice of 8mm, 10mm, 11mm, 13mm, or 16mm sizes.
Please note that these steel balls will only work with internally-threaded body jewelry with an internal 2mm thread pattern. Each surgical steel replacement ball is sold individually
$0.59
Thread this post into any externally ball to make an internally ball.
The thread compatibility is guaranteed on our jewelry only, but will be compatible with most of the jewelry on the market.
Very simple and unique idea...the possibilities are endless!!
You are buying the post ONLY. You will need to purchase loose balls, spikes, jewelry, etc to create the any of the combinations pictured.
1.2mm Threaded piece to Turn any 14g External end into an internal piece of jewelry
You are purchasing 1 Steel Threaded end 1.2mm threading 1.2mm thick by 3.4mm long.
$1.29
These balls will fit in either 18g or 16g because of it's 0.90mm internally threaded pattern.
$1.99
These surgical steel cones can be used as replacement tops on any of our 12g or 14g internally-threaded body jewelry that has an internal 1.2mm thread pattern.
Add one of these cones onto the end of your labret, use one with a dermal anchor, or even attach one to each end of a straight, curve, or circular (horseshoe) barbell.
Thread length is 2mm Thread pattern is 1.2m
Made from 1 solid piece of material
Jewelry sold seperately!
$1.49
Use with our MicroDermal Anchors or Labret Post.
Thread length is 2mm
Thread pattern is 1.2mm which means you can use on a 14g or 12g barbell piece of body jewelry that uses this thread pattern.
Made from 1 solid piece of material
$7.49
Threadless Titanium Replacement Top - Prong Set Opals
0.45mm Threadless Shaft. Compatible with 0.5mm Threadless Jewelry
Change up the look of your jewelry quickly and easily
Hundreds of color and size combinations to choose from
How to Use Threadless Jewelry:
Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place.
Follow the instructions below to secure the threadless end into the threadless shaft
- Insert the pin one-third to halfway into the shaft.
- Hand-bend slightly the insertion pin against the shaft.
- Push the end into the shaft and test the fit.
- Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.
$4.49
Threadless Titanium Replacement Top - Flat Opal
0.45mm Threadless Shaft. Compatible with 0.5mm Threadless Jewelry
Change up the look of your jewelry quickly and easily
Hundreds of color and size combinations to choose from
How to Use Threadless Jewelry:
Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place.
Follow the instructions below to secure the threadless end into the threadless shaft
- Insert the pin one-third to halfway into the shaft.
- Hand-bend slightly the insertion pin against the shaft.
- Push the end into the shaft and test the fit.
- Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.
$8.99
Threadless titanium cones made of synthetic opal
These eye-catching replacement pieces are compatible with all of our 18 gauge, 16 gauge, and 14 gauge threadless jewelry
0.45mm Threadless
Change up the look of your jewelry quickly and easily
Hundreds of color and size combinations to choose from
How to Use Threadless Jewelry:
Threadless jewelry uses tension between the end and the shaft to fit and stay together. The end has an insertion pin which is slightly bent when inserted into a straight shaft. This slight bend of the pin against the straight shaft creates a spring tension, holding the end securely in place.
Follow the instructions below to secure the threadless end into the threadless shaft
- Insert the pin one-third to halfway into the shaft.
- Hand-bend slightly the insertion pin against the shaft.
- Push the end into the shaft and test the fit.
- Adjusting the Fit: If it is too tight, take some of the bend out of the pin and try again. Remember, adjust slightly and then try again.
$1.99
Titanium 6Al-4V-Eli ASTM: F-136
Fits 18g and 16g internally threaded jewelry or any internally threaded jewelry with a matching internal thread pattern.
Thread length is 2mm
Thread pattern is 0.9mm
Made from 1 solid piece of material. You are only buying 1 End. You will need to buy the jewelry separately.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver.
6mm or 8mm in diameter.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
Choose yours below!
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Internally Threaded Pumpkin Head - Sterling Silver Threaded End by Flaming Bones.
These pieces are about 10.5mm in diameter and fit any 14g or 12g internally threaded piece with a matching thread pattern (1.2mm).
Great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a matching thread pattern.
Price is per piece (1=one piece).
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops with either a silver dome or gem accent for any internally threaded 14g piece of body jewelry.
These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted Mokume-Gane Wood Grained Metal - Flat Threaded End in Sterling Silver by Flaming Bones.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each dome is 6.5mm (1/4"). When you choose a design from the drop-down box, you will see a pic for that design.
Choose yours below!
Mokume-Gane is a Japanese metalworking procedure which produces a mixed-metal laminate with distinctive layered patterns. Mokume gane translates closely to "wood grain metal" or "wood eye metal", describing the way the metal takes on the appearance of natural wood grain.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Gold Plated Sterling Silver.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver and is available with gold plating.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver and is approximately 4.1mm x 5.3mm
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Beautiful handcrafted threaded tops for any internally threaded 14g piece of body jewelry. These tops are great for labrets, dermal anchors, or curves. These pieces will fit on any of our internally threaded body jewelry with a 1.2mm thread pattern.
Each piece is crafted from genuine Sterling Silver and is available with Gold Plating.
Posts (threading) is crafted from solid Titanium 6Al-4V-Eli ASTM F-136.
Choose yours below!
This product is offered at a lower price to professionals working in a studio. Please sign in or sign up for a professional account for better pricing on this and many other products in our store.
Showing 30/112
Recently viewed products
Explore Related Collections
Collection description
- Choosing a selection results in a full page refresh.
- Opens in a new window.