Largest van delivery route on the East Coast
Free shipping on $250+
Professionals only
Largest van delivery route on the East Coast
Free shipping on $250+
Professionals only
Largest van delivery route on the East Coast
Free shipping on $250+
Professionals only
Largest van delivery route on the East Coast
Free shipping on $250+
Professionals only
Largest van delivery route on the East Coast
Free shipping on $250+
Professionals only
Largest van delivery route on the East Coast
Free shipping on $250+
Professionals only
Welcome to Razorblade Pro Tattoo & Piercing Supply
Main menu
-
Shop All
- Shop All
-
Tattoo Supplies
-
Tattoo Inks
-
Piercing & Body Jewelry
-
Medical Supplies
-
Shop Equipment
-
PMU
-
Books & Swag
-
Tattoo Supplies
- Tattoo Supplies
-
Cords & Cables
-
Ink Mixing
-
Power Supplies
-
Shop Equipment
-
Stencil Supplies
-
Tattoo Machines
-
Medical
-
Tattoo Needles
- Tattoo Needles
-
Cartridges
-
On-Bar Needles
-
Tattoo Inks
- Tattoo Inks
-
Browse By Color
-
Browse By Brand
-
Body Jewelry
- Body Jewelry
-
Balls, Tops & Addons
-
Circulars/Horseshoes
-
Curved Barbells
-
Ear Jewelry
-
Flaming Bones
-
Labrets
-
Microdermals
-
Nipple Jewelry
-
Nostril
-
Piercing Retainers
-
Rings
-
Septum
-
Straight Barbells
-
Piercing Supplies
Your cart
Choose your Location
-
Razorblade HQ
Free
Usually ready for pickup in 24 hours
22 N Cameron St, Harrisburg, PA 17101
📞 (+1) 212-456-7890
🕐 Mon – Fri: 8:30 am – 10:30 pm
Sat: 8:30 am – 10:30 pm
Sun: Closed
77 products
77 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$14.99
Create a masterwork for display in your shop or home with this 5-1/2" x 7" canvas by APOF. This canvas is silicone and rubber-based with a pink tone like the APOF synthetic limbs. It makes for a unique, compact wall adornment. The thickness of this is roughly 0.25"
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.
From $3.99
Silicone Synthetic Tattooable Sample Square by A Pound of Flesh — Single or Pack of 6
These tattooable sample squares are a great introduction to the A Pound of Flesh variety of tattooable synthetic skins. Use them for tattooing practice and to get a feel for the silicone and rubber-based texture of APOF canvases. The pack of 6 sample squares features one square for every skin tone A Pound of Flesh offers, including Fitzpatrick tones 2–5, clear, and white. This listing is for a single tattooable sample square or a pack of 6. The single squares will be a random tone.
Specifications:
- Square Size: 1.75”
- Color Options: Fitzpatrick Tones 2–5, Clear and White
- A single square will be a random tone
- Manufactured from silicone and rubber-based materials
- Ideal for tattooing practice
- Tattooable on both sides
- Made in the USA
- Price per a single square or a pack of 6
Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the good one: the tattooable Angel. He’ll add angelic sweetness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$134.99
From the depths of the APOF facilities come two tattooable forces: One is good, and one is evil.
This is the evil one: the tattooable Devil. He’ll add fiendish spiciness to your 3D portfolio. With life-like curvature and texture, this perfectly molded APOF Cutie Doll is a display piece who’s perfect for palm-sized tattoos. Once you’ve tattooed him, set him up using the included display platform and rod. Complete with horns and a removable devil’s pitchfork, he’ll be sure to turn heads in your studio or at your next convention.
Dimensions:
Doll: ~10.5” (L) x 7.5” (W); 4” height
Display Rod: 3.5” (L) x 0.5” (W)
Key Features:
- Molded to resemble a baby doll
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
- Comes with display platform + rod
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the foot with a skin scribe or markers, use the hairspray and still let dry overnight.
$49.99
Unleash your large-scale ideas on this tattooable backpiece. The tattooable backpiece is lightweight with an even surface, so you can tattoo all your wildest full back panel ideas in miniature and with abandon. Showcase your full-back work to clients when you’re done… then book them for some real-life back panel tattoos.
Dimensions:
11” (W) x 17” (L) x .25” thick
Stencil Application Tips:
- Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it
- Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel
- Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface
- Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
- Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
- Peel away your stencil carefully.
- Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.
$49.99
Unleash your large-scale ideas on this tattooable backpiece. The tattooable backpiece is lightweight with an even surface, so you can tattoo all your wildest full back panel ideas in miniature and with abandon. Showcase your full-back work to clients when you’re done… then book them for some real-life back panel tattoos.
Dimensions:
11” (W) x 17” (L) x .25” thick
Stencil Application Tips:
- Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it
- Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel
- Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface
- Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
- Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
- Peel away your stencil carefully.
- Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.
From $39.99
From the tub to your studio, these tattooable Lucky Ducky's are a true icon.
Oh yes… he really is duck-shaped and bright yellow, which means he’s sure to capture the attention of potential clients. Take a quack at tattooing the Lucky Ducky in size large for palm-sized works or the small size for micro tattoos.
Add him to your 3D portfolio today, tattoo your masterworks, and watch the new clients roll in.
Available Sizes:
- Small Ducky: 3.5" (L) x 3" (W) x 3"
- Large Ducky: 5.5" (L) x 4.5" (W) x 5"
Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blow-dry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.
$39.99
No more tattooing real grapefruits… they go bad, anyway.
Round, juicy, and GMO-free, these tattooable grapefruit is fresh out of its molding and ready for your masterworks. Add this iconic tattooable hunk of nostalgia to your 3D portfolio and grow your skills on life-like flesh…. In fruit form.
Note: As with all Grapefruits, the color is never 100% the same. You can expect a rich yellowish color similar to the picture, but it won't always be exact.
Dimensions:
~3.5” diameter
Key Features:
- Molded into a grapefruit shape
- Life-like in size and shape
- Made with silicone and rubber-based materials
- Apprentices and beginners can practice tattooing techniques
- Professionals can use as a 3D portfolio or canvas to try new equipment and techniques
Stencil Application Tips:
Step 1: Apply isopropyl alcohol to a sheet of paper towel. Then wipe the tattoo site with your paper towel to clean it.
Step 2: Soak another sheet of paper towel with isopropyl alcohol. Then run a Speed Stick deodorant directly on the alcohol-soaked paper towel.
Hygiene Tip: Never apply the Speed Stick deodorant directly to the tattooable surface.
Step 3: Rub the Speed Stick deodorant and alcohol mixture directly onto the tattoo site.
Step 4: Apply your stencil evenly. Put pressure on it for about 5–10 seconds.
Step 5: Peel away your stencil carefully.
Step 6: Blowdry your freshly applied stencil for 5–10 minutes. Then let it dry fully overnight.
$149.99
Showcase your work with this 28” x 40” Fitzpatrick tone 5 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~28” (W) x 40” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.
$149.99
Showcase your work with this 28” x 40” Fitzpatrick tone 4 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~28” (W) x 40” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.
$149.99
Showcase your work with this 28” x 40” Fitzpatrick tone 3 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~28” (W) x 40” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the plank with a skin scribe or markers, use the hairspray and still let dry overnight.
$52.49
Showcase your work with this 10.5” x 22” Fitzpatrick tone 5 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~10.5” (W) x 22” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$52.49
Showcase your work with this 10.5” x 22” Fitzpatrick tone 4 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~10.5” (W) x 22” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$52.49
Showcase your work with this 10.5” x 22” Fitzpatrick tone 3 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~10.5” (W) x 22” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$124.99
The APOF Arm and Hand is a favorite among artists and comes without jitters, blood, or hairs to shave. APOF put their heart (and arms) into this classic molding so it accurately recreates the experience of tattooing on real limbs. The APOF arm is a superb addition to your 3D portfolio so clients can see firsthand how your work looks like on "skin." Take your pick between a right or left Fitzpatrick skin tone 5 arm.
Dimensions: ~16” (L) x 4.5” (W) x 3.25” (Thickest Point)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
This arm and hand is available in either Right or Left. Choose below.
$124.99
The APOF Arm and Hand is a favorite among artists and comes without jitters, blood, or hairs to shave. APOF put their heart (and arms) into this classic molding so it accurately recreates the experience of tattooing on real limbs. The APOF arm is a superb addition to your 3D portfolio so clients can see firsthand how your work looks like on "skin." Take your pick between a right or left Fitzpatrick skin tone 4 arm.
Dimensions: ~16” (L) x 4.5” (W) x 3.25” (Thickest Point)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
This arm and hand is available in either Right or Left. Choose below.
$124.99
The APOF Arm and Hand is a favorite among artists and comes without jitters, blood, or hairs to shave. APOF put their heart (and arms) into this classic molding so it accurately recreates the experience of tattooing on real limbs. The APOF arm is a superb addition to your 3D portfolio so clients can see firsthand how your work looks like on "skin." Take your pick between a right or left Fitzpatrick skin tone 3 arm.
Dimensions: ~16” (L) x 4.5” (W) x 3.25” (Thickest Point)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
This arm and hand is available in either Right or Left. Choose below.
$44.99
Showcase your work with this 11” x 17” Fitzpatrick tone 5 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~11” (W) x 17” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$44.99
Showcase your work with this 11” x 17” Fitzpatrick tone 4 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~11” (W) x 17” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$44.99
Showcase your work with this 11” x 17” Fitzpatrick tone 3 silicone canvas by APOF. The ample tattooable space allows you plenty of flesh to tattoo whatever you desire: practice new techniques, create a showpiece for framing, or sell your Dr. Frankenstein creations to admiring clients. Unlike real skin, you have two tattooable surfaces on this canvas, doubling your creative space.
Dimensions: ~11” (W) x 17” (L); 3mm Thick
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$14.99
Fan of the original plank of flesh by APOF? The same oval slab of tattooable skin you know and love is now in miniature, complete with a decorative beveled edge. Ideation and tattooing can be just as impressive on a smaller surface with the Micro Series Small Oval in Fitzpatrick tone 5. Create a small-scale masterpiece, attract the admiring eyes of prospective clients, or make all the little mistakes you please while trying out new techniques.
Dimensions: 5.5” (W) x 7” (L); 0.25” (Thickness)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$14.99
Fan of the original plank of flesh by APOF? The same oval slab of tattooable skin you know and love is now in miniature, complete with a decorative beveled edge. Ideation and tattooing can be just as impressive on a smaller surface with the Micro Series Small Oval in Fitzpatrick tone 4. Create a small-scale masterpiece, attract the admiring eyes of prospective clients, or make all the little mistakes you please while trying out new techniques.
Dimensions: 5.5” (W) x 7” (L); 0.25” (Thickness)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$14.99
Fan of the original plank of flesh by APOF? The same oval slab of tattooable skin you know and love is now in miniature, complete with a decorative beveled edge. Ideation and tattooing can be just as impressive on a smaller surface with the Micro Series Small Oval in Fitzpatrick tone 3. Create a small-scale masterpiece, attract the admiring eyes of prospective clients, or make all the little mistakes you please while trying out new techniques.
Dimensions: 5.5” (W) x 7” (L); 0.25” (Thickness)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
$14.99
Say hello to the tattooable small kindred fleshling of this 11” x 9” octagonal plaque by APOF. Featuring the very same beveled edge and style that makes this slab of flesh oh so much more than a slab, the small square Fitzpatrick tone 5 plaque is designed for tiny showcasing and diminutive display. Your 3D portfolio will be both compact and full of flair. Create a palm-sized masterwork on this Micro Series Fitzpatrick Tone 5 Small Plaque, hang it up, or sell it to prospective clientele.
Dimensions: 5.5” (W) x 7” (L); 0.25” (Thickness)
Helpful stencil application tip:
Experience shows that using thermal fax paper for stencils along with stencil stuff for application works exceptionally well.
After placing the stencil, spray a thin coat of an aerosol hairspray and let dry overnight.
Do not let it dry for more than a day, or it may become permanent.
When drawing directly onto the hand with a skin scribe or markers, use the hairspray and still let dry overnight.
Showing 30/77
Recently viewed products
Explore Related Collections
Collection description
- Choosing a selection results in a full page refresh.
- Opens in a new window.